How to use measured variables in simscape multibody

Question

Federico Barison 2024-5-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2115631-how-to-use-measured-variables-in-simscape-multibody

评论： Federico Barison 2024-7-22

Support_parametric (2).zip

I'm trying to create a multibody model of the compensated arm i designed (see picture attached) to optimize its geometry.

I have some problems identifying a way to determine the cable end where the spring must be attached.

To do so i want to impose the cable length constant and so i'm measuring the wrap angles of spool and pulley, as you can see in the slx attached. The problem is that i have to run the program first with the subsystem commented out to create the variables 'WA_spool1' and 'WA_perno1', and then i can generate the two rigid transforms in the subsystem and measure the section's length.

Is it possible to use those variables in real time inside the simscape program? Do you know any other way i can model this spring-cable assembly in simscape multibody?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Himanshu 2024-7-19

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2115631-how-to-use-measured-variables-in-simscape-multibody#answer_1487766

Hey Federico,

To solve this problem, you can use Simulink to create a feedback loop that updates the wrap angles in real-time, eliminating the need to run the program twice. One approach is to use a MATLAB Function block or an S-Function to dynamically calculate the wrap angles and update the rigid transforms within the same simulation step. Here's the documentation for the same:

https://www.mathworks.com/help/simulink/ug/what-is-a-matlab-function-block.html

https://www.mathworks.com/help/simulink/sfg/what-is-an-s-function.html

Alternatively, you can explore Simscape's built-in capabilities to model cable-spring assemblies more accurately by using specialized blocks that maintain cable length and automatically adjust the spring attachment point based on the current system configuration. The following documentation may be helpful:

https://www.mathworks.com/help/sm/ref/beltcableproperties.html

Hope this helps!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Federico Barison 2024-7-22

thanks for your response

The second suggestion you gave me seems exactly what i was looking for in first instance.

In the attached documentation they talk about defining state tagets in joints connected to the cable system in order to "use those targets to set the length of the cord and to guide the placement of its ends".

But i couldn't find any more detailed information or practical example on how to achieve these objectives, do you have any other suggestion to try to understand how this works?

请先登录，再进行评论。