HOW CAN I TURN AN EQUATION INTO COMPONENT IN A LIBRARY?

1 次查看（过去 30 天）
usha
usha 2024-6-8
回答： Yifeng Tang 2024-6-11
component CantileverBeamDeflection
% Define the nodes
nodes
P = foundation.mechanical.translational.translational; % Translational node P
C = foundation.mechanical.translational.translational; % Translational node C
end
% Define the parameters
parameters
L = {1, 'm'}; % Length of the beam
E = {210e9, 'Pa'}; % Young's modulus
I = {1e-6, 'm^4'}; % Second moment of area
w = {100, 'N/m'}; % Uniform load per unit length
x = {0.5, 'm'}; % Distance from the fixed end
end
% Define the variables
variables
delta = {0, 'm'}; % Deflection
end
% Define the equations
equations
% Deflection equation for a fixed-free beam under uniform load
delta == (w*x^2)/(24*E*I) * (L^3 - 2*L*x + x^2);
% Force equilibrium at nodes
P.f == -w * x;
C.f == w * x;
end
end

请先登录，再回答此问题。

回答（2 个）

Yifeng Tang
Yifeng Tang 2024-6-11
Hi Usha,
In addition to Ayush's answer, I suggest that you look at the source code of a translational spring block. You custom block seems to missing equations between port velocities (across variable) and internal displacement (delta). The equations for the force (P.f and C.f) seem a bit problematic as well to me. Usually the force is the difference between those at the port. What you have seems to assume one end is fixed to the ground. I understand it's usually how a beam works, but defining the equations with such assumptions (in your mind) may confuse Simscape :p
Ayush Aniket
Ayush Aniket 2024-6-11
Hi Usha,
To turn an equation into a component in a library in Simulink, follow the below steps:
  1. Save the Simscape file ( .ssc) with the component defnintion (as mentioned above in the question) in a directory that's on your MATLAB path. You should defind the component's physical nodes, parameters, variables, and equations within the file. Follow the guidelines as given here: https://www.mathworks.com/help/simscape/lang/creating-custom-components.html#brnos_c-4
  2. The next step is to organise your component file in namespace folders. You should save the file inside a folder on the MATLAB path and the name of the folder should start with a '+' character for e.g. '+MyComponents'.
  3. The last step is to build the library to make your component available in Simulink. You can do this by using the ssc_build function. For example, if your component is saved in a directory named '+MyComponents', you would call ssc_build MyComponents.
Refer to the following documentation link to read in detail about the steps: https://www.mathworks.com/help/simscape/lang/building-custom-block-libraries-from-simscape-component-files.html

类别

在 Help Center 和 File Exchange 中查找有关 Simulation and Analysis 的更多信息

标签

产品


版本

R2023b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by