raytracing channel on matlab

Question

nicolas pellanda 2024-6-12

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2127911-raytracing-channel-on-matlab

评论： nicolas pellanda 2024-6-13

Hello everyone, I am analyzing a real urban environment taken from open street map (like google maps). In this I am looking at multipath propagation through the raytracing model, where I create the multipath channel between transmitters and receiver moving through the comm.RayTracingChannel object. Since I am not providing any signal as an input to the channel, what the channel returns to me is an array in which there are samples that describe the multipath to me. What I would like to know is whether what is returned to me is the impulsive response of the channel, or simply an array of samples describing to me the power trend due to the fading generated by the doppler effect. I think it is this second option, but I would like some confirmation.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sudarsanan A K 2024-6-13

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2127911-raytracing-channel-on-matlab#answer_1471326

在 MATLAB Online 中打开

Hi Nicolas,

The array returned to you represents the impulse response of the channel, detailing the time delays and attenuation of multipath components, not directly the power trend due to Doppler fading.

For example,

rtchan = comm.RayTracingChannel(ChannelFiltering=false);
cir = rtchan();

gives you the channel impulse response in the variable "cir".

If you are interested to get the power-delay profile, youd can use this command:

showProfile(rtchan);

Please refer to the documentation for better understanding of the different use-cases with the "comm.RayTracingChannel" System Object:

https://www.mathworks.com/help/comm/ref/comm.raytracingchannel-system-object.html

I hope this helps!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

nicolas pellanda 2024-6-13

Thank you for the answer. But isn't the impulse response of the multipath channel a series of dirac deltas, one for each path, spaced apart according to the arrival time of the signal from that path?

There is also a way to save the power delay profile on some variable? Because it looks very helpfull to me

Thank you!

请先登录，再进行评论。