Phased Array antenna design

6 次查看（过去 30 天）
Naveenchandra
Naveenchandra 2024-6-19
评论： Naveenchandra 2024-6-24
Hello all,
I am designing one phased array antenna design for one of our product.
Currently I am designing array antenna with 12x8 array struture and subarray with 3x1 structure. So, we will be having 4 sub array on one row. That is 4 subarray with 3 elements i.e.total 12 vertical elements on one row and 8 horizontal elements.
I would like to perform array simulation with amplitude tapering and phase excitation with both dolph chebyshev and taylor window for one complete vertical elements i.e N= 12, with required side lobe level (SLL) as around 25dB
If we could get the amplitude tapering and phase excitation values , is it possible to optimize the tapering with proer ratio for each subarray because i need to design the power divider with 3X1 elements, however, the power ratio should be similar for all other sub arrays? Is it possible in the MATLAB?
Could you please help me to work with some examples specifically on the amplitude tapering and phase exitaions?
Is there any custumized Matlab scripted tool to design phased array antenna design with vertical and horizonatal steering?
Could you please give me the valuable support on this?

请先登录，再回答此问题。

采纳的回答

Naveenchandra
Naveenchandra 2024-6-24
Thank you!,
Which apps should I use for the Phased antenna Array simulation? I think, we have separate apps like antenna array designer and antenna designerers
Could you please help me with that?
Best regards,
Naveen

更多回答（1 个）

Muskan
Muskan 2024-6-24
Hello,
You can refer to the following documententation on "Phased Array Design and Analysis" for more information : https://in.mathworks.com/help/phased/phased-arrays.html
You can also refer to the documentation on "Get Started with Phased Array System Toolbox" to Design and simulate phased array and beamforming systems: https://in.mathworks.com/help/phased/getting-started-with-phased-array-system-toolbox.html?s_tid=CRUX_lftnav
I hope this helps!
  1 个评论
Naveenchandra
Naveenchandra 2024-6-24
Could any one please tell me how to reduce the SLL by using amplitude taepring using antenna array tool?
It would be very helpful.
Thanks,
Naveen

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Antennas, Microphones, and Sonar Transducers 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by