Create a mock with behavior based on specific input

Question

Jeevraj Hejmady 2024-7-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2135216-create-a-mock-with-behavior-based-on-specific-input

评论： Jeevraj Hejmady 2024-7-9

采纳的回答： Ayush Singh

在 MATLAB Online 中打开

I'm trying to write a mock test for a class, and want to mock the output based on specific input.

Here is my Test Class

classdef MyClass
    methods
        function [out1, out2] = myMethod(obj, in1, in2, in3)
            out1 = in1 + in2 + in3;
            out2 = in1 * in2 * in3;
        end
    end
end

Based on MATLAB help section withExactInput and withAnyInputs doesnt take any inputs, Attempting to do so raises the error

So how to mock a test where same methods needs to be called with 2 differnet inputs and check the outputs.

classdef MyTest < matlab.mock.TestCase
    methods (Test)
        function testMultiInputOutputMethod(testCase)
            % Create a mock object and its behavior controller
            [mock, behavior] = testCase.createMock(?MyClass);
            
            % Define the behavior of the mock object's method for specific inputs
            testCase.assignOutputsWhen(withExactInput(behavior.myMethod(1, 2, 3)), {6, 6}); % Errors out
            testCase.assignOutputsWhen(withAnyInputs(behavior.myMethod(2, 3, 4)), {9, 24}); % Errors out
            
            % Use the mock object as if it were the real object
            [out1a, out2a] = mock.myMethod(1, 2, 3);
            [out1b, out2b] = mock.myMethod(2, 3, 4);
            
            % Verify the results
            testCase.verifyEqual(out1a, 6);
            testCase.verifyEqual(out2a, 6);
            testCase.verifyEqual(out1b, 9);
            testCase.verifyEqual(out2b, 24);
            
            % Verify that the mock object's methods were called with specific arguments
            testCase.verifyCalled(behavior.myMethod(1, 2, 3));
            testCase.verifyCalled(behavior.myMethod(2, 3, 4));
        end
    end
end

I know the above 'MyClass' doesnt need a mock, Any solution to the above problem would be helpful...

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Ayush Singh 2024-7-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2135216-create-a-mock-with-behavior-based-on-specific-input#answer_1482541

在 MATLAB Online 中打开

Hey Jeevraj!

To test the myMethod of MyClass with different inputs using mocks in MATLAB, you can use the MATLAB Unit Test Framework to create a mock object and define its behavior for different inputs.

However, since you want to test the actual method implementation with different inputs, you don't need to mock the method itself as you stated in your question. Instead, you can directly call the method with different inputs in your test case and verify the outputs.

classdef MyClassTest < matlab.unittest.TestCase
    methods (Test)
        function testMultiInputOutputMethod(testCase)
            % Create an instance of MyClass
            obj = MyClass();
            
            % Test 1: Call myMethod with first inputs
            [out1, out2] = obj.myMethod(1, 2, 3);
            testCase.verifyEqual(out1, 6);
            testCase.verifyEqual(out2, 6);
            
            % Test 2: Call myMethod with second inputs
            [out1, out2] = obj.myMethod(4, 5, 6);
            testCase.verifyEqual(out1, 15);
            testCase.verifyEqual(out2, 120);
        end
    end
end

I hope it answers your question!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Jeevraj Hejmady 2024-7-9

在 MATLAB Online 中打开

Hey Ayush Singh !!

Thanks for the suggestion, I was specifically looking specifically into the mock for a different problem, the above code was an example [a pseudo-code] to address the issue.

Digging bit deeper into MATLAB help, The solution simply was to proceed without using either `withExactInput` or `withAnyInputs`, wihtout that the tests are working as expected

classdef MyTest < matlab.mock.TestCase
    methods (Test)
        function testMultiInputOutputMethod(testCase)
            % Create a mock object and its behavior controller
            [mock, behavior] = testCase.createMock(?MyClass);
            
            % Define the behavior of the mock object's method for specific inputs
            testCase.assignOutputsWhen(behavior.myMethod(3, 4, 5), 99, 98); 
            testCase.assignOutputsWhen(behavior.myMethod(2, 3, 4), 97, 96); 
            
            % Use the mock object as if it were the real object
            [out1a, out2a] = mock.myMethod(1, 2, 3);
            [out1b, out2b] = mock.myMethod(2, 3, 4);
            [out1c, out2c] = mock.myMethod(3, 4, 5);
            
            % Verify the results
            testCase.verifyEqual(out1a, 6);
            testCase.verifyEqual(out2a, 6);
            testCase.verifyEqual(out1b, 97);
            testCase.verifyEqual(out2b, 96);
            testCase.verifyEqual(out1c, 99);
            testCase.verifyEqual(out2c, 98);
            
            % Verify that the mock object's methods were called with specific arguments
            testCase.verifyCalled(behavior.myMethod(3, 4, 5));
            testCase.verifyCalled(behavior.myMethod(2, 3, 4));
        end
    end
end

请先登录，再进行评论。

Create a mock with behavior based on specific input

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

Create a mock with behavior based on specific input

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

更多回答（0 个）

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论