Questions about the input X of pcolor and contourf.

Question

中祥范 2024-7-19，14:18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2138786-questions-about-the-input-x-of-pcolor-and-contourf

编辑： Cris LaPierre 2024-7-21，11:33

采纳的回答： Cris LaPierre

I have two questions, the first one is:

In the documentation of pcolor

the input arguments X is described as follows:

x-coordinates, specified as a matrix the same size as C, or as a vector of length n, where [m,n] = size(C). The default value of X is the vector (1:n).

To create a rectangular grid of vertices, specify X as either of the following:

A vector containing values that are increasing or decreasing.
A matrix that is increasing or decreasing along one dimension and is constant along the other dimension. Set the dimension that varies to the opposite of the dimension that varies in matrix Y. You can use the meshgrid function to create the X and Y matrices.

To create a parametric grid, create a rectangular grid and pass it through a mathematical function.

But in its case of specifying Parametric Grid, X and Y don't follow do not meet the above requirement, which is "A matrix that is increasing or decreasing along one dimension and is constant along the other dimension. Set the dimension that varies to the opposite of the dimension that varies in matrix Y."

I wonder if that means you can use X and Y coordinates for scatter points, for example:

X = [1 2 3; 2 3 4; 3 4 5]

Y = [1 1 1; 2 2 2; 3 3 3]

And the second one is:

In the documentation of contourf

x-coordinates, specified as a matrix the same size as Z, or as a vector with length n, where [m,n] = size(Z). The default value of X is the vector (1:n).

When X is a matrix, the values must be strictly increasing or decreasing along one dimension and remain constant along the other dimension. The dimension that varies must be the opposite of the dimension that varies in Y. You can use the meshgrid function to create X and Y matrices.

When X is a vector, the values must be strictly increasing or decreasing.

I wonder if that I can use X and Y coordinates for scatter points, for example:

X = [1 2 3; 2 3 4; 3 4 5]

Y = [1 1 1; 2 2 2; 3 3 3]

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Cris LaPierre 2024-7-19，15:13

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2138786-questions-about-the-input-x-of-pcolor-and-contourf#answer_1488116

移动：Cris LaPierre 2024-7-19，15:15

在 MATLAB Online 中打开

See this example: Specify parametric grid

[X,Y] = meshgrid(-3:6/17:3)

X = 18x18

-3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000 -3.0000 -2.6471 -2.2941 -1.9412 -1.5882 -1.2353 -0.8824 -0.5294 -0.1765 0.1765 0.5294 0.8824 1.2353 1.5882 1.9412 2.2941 2.6471 3.0000

<mw-icon class=""></mw-icon>

Y = 18x18

-3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -3.0000 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.6471 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -2.2941 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.9412 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.5882 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -1.2353 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.8824 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.5294 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 -0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765 0.1765

<mw-icon class=""></mw-icon>

XX = 2*X.*Y

XX = 18x18

18.0000 15.8824 13.7647 11.6471 9.5294 7.4118 5.2941 3.1765 1.0588 -1.0588 -3.1765 -5.2941 -7.4118 -9.5294 -11.6471 -13.7647 -15.8824 -18.0000 15.8824 14.0138 12.1453 10.2768 8.4083 6.5398 4.6713 2.8028 0.9343 -0.9343 -2.8028 -4.6713 -6.5398 -8.4083 -10.2768 -12.1453 -14.0138 -15.8824 13.7647 12.1453 10.5260 8.9066 7.2872 5.6678 4.0484 2.4291 0.8097 -0.8097 -2.4291 -4.0484 -5.6678 -7.2872 -8.9066 -10.5260 -12.1453 -13.7647 11.6471 10.2768 8.9066 7.5363 6.1661 4.7958 3.4256 2.0554 0.6851 -0.6851 -2.0554 -3.4256 -4.7958 -6.1661 -7.5363 -8.9066 -10.2768 -11.6471 9.5294 8.4083 7.2872 6.1661 5.0450 3.9239 2.8028 1.6817 0.5606 -0.5606 -1.6817 -2.8028 -3.9239 -5.0450 -6.1661 -7.2872 -8.4083 -9.5294 7.4118 6.5398 5.6678 4.7958 3.9239 3.0519 2.1799 1.3080 0.4360 -0.4360 -1.3080 -2.1799 -3.0519 -3.9239 -4.7958 -5.6678 -6.5398 -7.4118 5.2941 4.6713 4.0484 3.4256 2.8028 2.1799 1.5571 0.9343 0.3114 -0.3114 -0.9343 -1.5571 -2.1799 -2.8028 -3.4256 -4.0484 -4.6713 -5.2941 3.1765 2.8028 2.4291 2.0554 1.6817 1.3080 0.9343 0.5606 0.1869 -0.1869 -0.5606 -0.9343 -1.3080 -1.6817 -2.0554 -2.4291 -2.8028 -3.1765 1.0588 0.9343 0.8097 0.6851 0.5606 0.4360 0.3114 0.1869 0.0623 -0.0623 -0.1869 -0.3114 -0.4360 -0.5606 -0.6851 -0.8097 -0.9343 -1.0588 -1.0588 -0.9343 -0.8097 -0.6851 -0.5606 -0.4360 -0.3114 -0.1869 -0.0623 0.0623 0.1869 0.3114 0.4360 0.5606 0.6851 0.8097 0.9343 1.0588

<mw-icon class=""></mw-icon>

YY = X.^2 - Y.^2

YY = 18x18

0 -1.9931 -3.7370 -5.2318 -6.4775 -7.4740 -8.2215 -8.7197 -8.9689 -8.9689 -8.7197 -8.2215 -7.4740 -6.4775 -5.2318 -3.7370 -1.9931 0 1.9931 0 -1.7439 -3.2388 -4.4844 -5.4810 -6.2284 -6.7266 -6.9758 -6.9758 -6.7266 -6.2284 -5.4810 -4.4844 -3.2388 -1.7439 0 1.9931 3.7370 1.7439 0 -1.4948 -2.7405 -3.7370 -4.4844 -4.9827 -5.2318 -5.2318 -4.9827 -4.4844 -3.7370 -2.7405 -1.4948 0 1.7439 3.7370 5.2318 3.2388 1.4948 0 -1.2457 -2.2422 -2.9896 -3.4879 -3.7370 -3.7370 -3.4879 -2.9896 -2.2422 -1.2457 0 1.4948 3.2388 5.2318 6.4775 4.4844 2.7405 1.2457 0 -0.9965 -1.7439 -2.2422 -2.4913 -2.4913 -2.2422 -1.7439 -0.9965 0 1.2457 2.7405 4.4844 6.4775 7.4740 5.4810 3.7370 2.2422 0.9965 0 -0.7474 -1.2457 -1.4948 -1.4948 -1.2457 -0.7474 0 0.9965 2.2422 3.7370 5.4810 7.4740 8.2215 6.2284 4.4844 2.9896 1.7439 0.7474 0 -0.4983 -0.7474 -0.7474 -0.4983 0 0.7474 1.7439 2.9896 4.4844 6.2284 8.2215 8.7197 6.7266 4.9827 3.4879 2.2422 1.2457 0.4983 0 -0.2491 -0.2491 0 0.4983 1.2457 2.2422 3.4879 4.9827 6.7266 8.7197 8.9689 6.9758 5.2318 3.7370 2.4913 1.4948 0.7474 0.2491 0 0 0.2491 0.7474 1.4948 2.4913 3.7370 5.2318 6.9758 8.9689 8.9689 6.9758 5.2318 3.7370 2.4913 1.4948 0.7474 0.2491 0 0 0.2491 0.7474 1.4948 2.4913 3.7370 5.2318 6.9758 8.9689

<mw-icon class=""></mw-icon>

colorscale = [1:18; 18:-1:1];

C = repmat(colorscale,9,1);

pcolor(XX,YY,C);

3 个评论
显示 1更早的评论隐藏 1更早的评论

中祥范 2024-7-21，4:05

So do you mean that we can use special data such as that in the Specify parametric grid case which does not meet the matrix requirements for X in pcolor and contourf ?

Cris LaPierre 2024-7-21，11:32

编辑：Cris LaPierre 2024-7-21，11:33

I have shared a couple examples of what parametric grids might be Based on that, I would interpret the doc as providing independent recommenations on how to create X and Y. There is the traditional grid, and then there is a parametric grid.

Feel free to try out some things on your own. That always helps me understand what is possible.

请先登录，再进行评论。

Answer 2

Voss 2024-7-19，15:18

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2138786-questions-about-the-input-x-of-pcolor-and-contourf#answer_1488126

编辑：Voss 2024-7-19，15:22

在 MATLAB Online 中打开

I interpret the pcolor documentation as saying that a rectangular grid and a parametric grid are separate special cases, so the X of a parametric grid does not have to conform to the requirements of the X of a rectangular grid.

In other words, the general requirement on X is:

"x-coordinates, specified as a matrix the same size as C, or as a vector of length n, where [m,n] = size(C). The default value of X is the vector (1:n)."

If you want a rectangular grid (a special case), then

"To create a rectangular grid of vertices, specify X as either of the following:

A vector containing values that are increasing or decreasing.
A matrix that is increasing or decreasing along one dimension and is constant along the other dimension. Set the dimension that varies to the opposite of the dimension that varies in matrix Y. You can use the meshgrid function to create the X and Y matrices."

If you want a parametric grid (another special case), then:

"To create a parametric grid, create a rectangular grid and pass it through a mathematical function."

So your example works fine:

X = [1 2 3; 2 3 4; 3 4 5];

Y = [1 1 1; 2 2 2; 3 3 3];

Z = rand(3);

pcolor(X,Y,Z)

The same example also works for contourf, even though it appears to violate the requirements specified in its documentation:

contourf(X,Y,Z)

In fact, you can use arbitrary matrices in either function without error (assuming their sizes are consistent with each other), but the outputs may be difficult to interpret:

X = rand(5,8);

Y = rand(5,8);

Z = rand(5,8);

pcolor(X,Y,Z)

contourf(X,Y,Z)