Matlab HDL cosimulation for Lattice CPLD

Question

_asdf_ 2024-8-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2143261-matlab-hdl-cosimulation-for-lattice-cpld

评论： Marc Erickson 2024-8-6

I regularly develop VHDL code for controllers that is supposed to run on FPGAs/CPLDs and I'm looking for possibilities to co-simulate this code in a closed-loop simulation environment that mimics the behavior of the controlled system. So what I would like to have is that I can define a dyamic model in Matlab (e.g., as a state-space model or a transfer function) and to simulate this model together with the controller's HDL implementation using the outputs of the models as stimuli for the controller and the output of the controller as input for the dynamic model. Is there any way I can accomplish this with Matlab? If so, what do I have to look for?

What I found so far is apparently called HDL verifier and seems to be pretty much what I want. However, I'm currently using Lattice MachXO2 CPLDs and Lattice diamond comes with "ModelSim Lattice FPGA Edition" as a simulator. According to this post

https://ch.mathworks.com/matlabcentral/answers/493504-which-modelsim-editions-can-i-use-for-cosimulation-with-hdl-verifier

HDL verifier requires a FLI (foreign language interface), which the Lattice Edition of ModelSim does not provide. Is there any way I can use HDL verifier, e.g., by using a different simulator?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Marc Erickson 2024-8-6

Yes, as you surmised, our product requires a PLI to integrate the HDL simulation kernel with the Simulink simulation kernel. We support four major simulators: ModelSim/Questa, Xcelium, VCS, and Vivado Simulator.

See https://www.mathworks.com/help/hdlverifier/gs/supported-eda-tools.html for more details.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Ayush 2024-8-6

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2143261-matlab-hdl-cosimulation-for-lattice-cpld#answer_1495136

编辑：Ayush 2024-8-6

Hello @_asdf_,

As you have clearly mentioned and found out that ModelSim Lattice FPGA Edition is not support by the HDL verifier as they do not provide a FLI (foreign language interface). The best way forward as a workaround is to try out popular supported simulators like the ModelSIM Special Edition, Questa Prime or the others mentioned in the MATLAB Answer community post.

As a workaround, you could try to manually create a co-simulation bridge that interfaces between ModelSim for simulation and MATLAB/Simulink for the analysis of the data fetched from the simulation. This could be complex and would require a good understanding of both environments, but can be done using socket programming where you can host a MATLAB server and a ModelSim client. You can refer to the following documentation to know more about socket programming in MATLAB:

https://www.mathworks.com/help/instrument/communicate-using-tcpip-server-sockets.html

Hope it helps!