Why would I encounter an error message about unsuitable bus signal using DDS Blockset?

Question

昱颖陈 2024-8-18，14:08

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2146084-why-would-i-encounter-an-error-message-about-unsuitable-bus-signal-using-dds-blockset

评论：昱颖陈 2024-8-23，9:13

Hi,

I encounter the error : " The 'input port 1' of 'ddsblockset1/Outport' requires a bus, but it receives a non bus signal from the 'output port 1' of 'ddsblockset1/Write DDS Sample'."

The data type of the input and output ports has been selected as the "Dataype" defined by DDS. I don't seem to have any difference from the official example settings. Why did I encounter an error?

3 个评论
显示 1更早的评论隐藏 1更早的评论

昱颖陈 2024-8-19，7:39

I modified my own model followed the shapedemo example

praguna manvi 2024-8-21，8:52

can you please share your model

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

SACHIN KHANDELWAL 2024-8-23，4:04

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2146084-why-would-i-encounter-an-error-message-about-unsuitable-bus-signal-using-dds-blockset#answer_1503814

Hi @昱颖陈,

Based on the image provided, it appears that the issue is that 'ddsblockset1/Outport' is expected to receive a 'Bus' signal, while 'ddsblockset1/Write DDS Sample' is providing a 'Non-Bus' signal.

Additionally, it seems that the output of your logic is currently a 'double'. To resolve this, try changing the output data type to a 'Bus' data type within your intermediate logic. If the issue persists, you can use a 'Bus Creator' block to convert the 'Non-Bus' signal into a 'Bus' signal.

For more detailed guidance, please refer to the following documentation: https://www.mathworks.com/help/simulink/slref/buscreator.html