Implementing a Checksum algorithm as Embedded Matlab Function
12 次查看(过去 30 天)
显示 更早的评论
Hello,
I have been trying implement a checksum algorithm. I have implmeneted a matlab function that converts the inputs to binary and then performs some bit-wise operations to compute the checksum. Unfortunately, this does not work as an embedded matlab function because of several reasons: 1) some functions including dec2bin, num2str, int2bin etc.. cannot be compiled 2) MxArray is not supported
The function I have coded is as follows. Is there anyway I can get these functions to compile or another way to perform functions such as the int2bin function. Thank you in advance for your help and suggestions.
function [chec , intcheck] = checksum (torque, extc, messageCntr)
% create dataArray for checksum from inputs
if (torque < 0)
pos_torque = abs(torque);
p = fliplr (bitget(bitcmp(uint16(pos_torque)), 1:16))
p = num2str(p)
char1 = dec2bin(bin2dec(p)+bin2dec('0000000000000001'))
torque_fin = char1-'0';
else
torque_fin = fliplr(bitget(torque, 1:16));
end
byte_0=torque_fin(1:8);
byte_1=torque_fin(9:16);
byte_2=zeros(1,8);
byte_3=zeros(1,8);
byte_4=zeros(1,8);
byte_5=zeros(1,8);
bits_extc = fliplr(bitget(extc, 1:4));
bits_messageCntr = fliplr(bitget(messageCntr, 1:4));
byte_6 = [bits_extc, bits_messageCntr];
dataArray = [byte_0, byte_1, byte_2, byte_3, byte_4, byte_5, byte_6];
% checksum
%initialization
dataLength= 6;
startValue = [0,0,0,1,1,0,1,1]; % 1B
genPol = [1,0,0,1,1,0,1,1]; %9B
finalXor = [1,1,1,1,1,1,1,1]; %FF
byteCount =0;
bitCount = 0;
chec = 0;
chec = startValue;
for byteCount = 0:dataLength
chec = bitxor(dataArray (byteCount*8+1: (byteCount*8 +8)), chec);
%C = dataArray (byteCount*8+1: (byteCount*8 +8))
D = chec
for bitCount=1:8
if (chec(1) ~= 0)
chec = bitxor([chec(2:8),0], genPol);
else
chec = [chec(2:8),0];
end
end
end
chec = bitxor(chec, finalXor);
intcheck = bin2dec(num2str(chec));
end
0 个评论
回答(1 个)
Sriram Narayanan
2015-5-6
I simplified your code to not include the condition for negative torque (which could be implemented using Simulink blocks) and I was able to calculate the correct checksum. Please note that functions like "num2str" cannot be compiled and therefore, need to be declared as extrinsic functions using the coder.extrinsic keyword. Only thing that you have to ensure is that the outputs to your function have their sizes pre-defined using a pre-initialization.
More information about this function is below:
Please find the working model which consists of the MATLAB function block attached.
2 个评论
NGR MNFD
2021-10-2
hello dear ...
How can I check the checksum of the force signal binary file? This force signal is measured by a 12-bit adc. I was able to display it through the following method.
fileID1=fopen('control1.let','r');
A= fread(fileID1, [3, 45000], 'uint8')'; % matrix with 3 rows, each 8 bits long, = 2*12bit
fclose(fileID1);
M2H= bitshift(A(:,2), -4);
M1H= bitand(A(:,2), 15);
PRL=bitshift(bitand(A(:,2),8),9); % sign-bit
PRR=bitshift(bitand(A(:,2),128),5); % sign-bit
M( : , 1)= bitshift(M1H,8)+ A(:,1)-PRL;
M( : , 2)= bitshift(M2H,8)+ A(:,3)-PRR;
N1 = reshape(M',[90000,1]); plot(N1);
Can I also check to see if it is correct or not? I do not know what code to use in MATLAB to calculate checksum? Please show me. Thank you.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Logical 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!