Assistance Needed: Simulating Power-Exponent-Phase Vortex Beam (PEPVB) Propagation in Oceanic Turbulence

3 次查看（过去 30 天）
kuan lin
kuan lin 2024-9-9
评论： kuan lin 2024-9-22
I am attempting to simulate the propagation characteristics of the Power-Exponent-Phase Vortex Beam (PEPVB) in oceanic turbulence based on the theoretical model provided in the paper Propagation properties of rotationally-symmetric power-exponent-phase vortex beam through oceanic turbulence. The model uses the extended Huygens-Fresnel diffraction integral and oceanic turbulence theory, and I’m trying to implement this in MATLAB.
I have followed the mathematical formulas provided in section 2 of the paper, particularly equations (1) to (8), which define the electric field and cross-spectral density for the PEPVB passing through turbulence. However, despite various attempts, I haven’t been able to get the simulation to work as expected.
The first image shows the results I generated using my own code, while the second image shows the results provided by the authors of the PEPVB study. The differences between these results are confusing me, especially regarding the implementation of the electric field formulas and how to handle the oceanic turbulence parameters, such as the rate of dissipation of turbulence kinetic energy (ε), the temperature-salinity contribution ratio (ω), and the dissipation rate of the mean-squared temperature (χT).
Could anyone with experience in PEPVB or similar simulations in MATLAB help me check my code or provide working examples? Any help would be greatly appreciated!
Thank you for your time and assistance

请先登录，再回答此问题。

回答（1 个）

UDAYA PEDDIRAJU
UDAYA PEDDIRAJU 2024-9-16
Hello Kuan Lin,
First of all, it would be great if you can attach the code you wrote, there's possibility of code debugging which make your goal achieve. You can check the following:
  • Electric Field Implementation: Ensure that each equation from the paper is implemented accurately in MATLAB. Check for any potential errors in complex number handling or matrix operations.
  • Turbulence Parameters: Verify that the parameters for oceanic turbulence (ε, ω, χT) are correctly set. Ensure units are consistent with those used in the paper.
  • Code Debugging: Use MATLAB’s debugging tools to trace your code execution and check intermediate values to identify discrepancies.
  • Validation: Compare your implementation with simpler cases or known results to validate your approach.
  1 个评论
kuan lin
kuan lin 2024-9-22
Hello UDAYA PEDDIRAJU,
Thank you for your previous response and suggestions. I’m happy to inform you that I have successfully resolved the ocean simulation issue and managed to simulate the propagation characteristics of the Power-Exponent-Phase Vortex Beam (PEPVB) through oceanic turbulence. Your advice regarding debugging and validation was especially helpful in identifying the discrepancies.
Currently, I am working on generating the phase diagram for the PEPVB and loading it onto a Spatial Light Modulator (SLM) to compare with the results from the oceanic turbulence simulation. However, I’m encountering some challenges, specifically:
  1. How to accurately generate the phase map for the PEPVB.
  2. Correctly loading the phase map onto the SLM for effective comparison.
If you have any suggestions or resources related to generating and loading phase maps onto an SLM, I would greatly appreciate your further guidance. If needed, I can also provide the code for your review.
Thank you again for your help!
Best regards,
Kuan Lin

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Marine and Underwater Vehicles 的更多信息

标签

产品


版本

R2024a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by