Issue with plotting order

100 次查看(过去 30 天)
Emily Barber
Emily Barber 2024-9-9,16:48
评论: Jatin 2024-9-11,12:56
Hello,
I have been trying to plot a shaded area (right y-axis) behind two lines (left y-axis), as shown in the code below. However, the shaded area always appears last, covering up the two lines. I've done this kind of graph before but have never had this issue. Best I can tell, it is because the right y-axis is plotted last. Is there a way to make the right y-axis plotted first? I can't simply switch which data is on the axis, unfortunately: they need to be in this order. Thanks for any help!
clear; clc; close all;
Data = xlsread("FigureOfMeritResults.xlsx");
% Extract data
Date = Data(469:1908,1);
FoM = Data(469:1908,3);
GHI = Data(469:1908,4);
% Calculate the running average over 5 data points
FoM_avg = movmean(FoM, 5);
GHI_avg = movmean(GHI, 5);
dFoM = zeros(length(FoM),1) + mean(FoM);
ticks = {'12:00AM','4:00AM','8:00AM','12:00PM','4:00PM','8:00PM','12:00AM'};
fz = 15;
%%
fig = figure;
set(gcf,'Color','w','Units','inches')
set(gcf,'Position',[1,1,5,6])
GHI_color = [0.8 0.8 1];
yyaxis left;
p1 = scatter(Date, FoM, 'Marker', '.', 'SizeData', 15, 'MarkerFaceColor', "#0072BD");
hold on;
p2 = scatter(Date, dFoM, 'Marker', '_', 'SizeData', 15, 'MarkerFaceColor', 'black');
hold on;
ax = gca;
ax.YColor = 'k';
yyaxis right;
xData = [Date; flipud(Date)];
yData = [zeros(size(GHI)); flipud(GHI)];
fillHandle = fill(xData, yData, GHI_color,'EdgeColor','none');
hold on;
ax = gca;
ax.YColor = 'k';
xlabel('Time of Day (hrs)', 'FontSize', fz);
numTicks = length(ticks);
tickPositions = linspace(min(Date), max(Date), numTicks);
xticks(tickPositions);
xticklabels(ticks);
set(gca, 'FontSize', fz);
ax = gca;
box on;
set(ax,'BoxStyle','full','LineWidth',2,'XGrid','off','XMinorTick','off','YGrid','off',...
'YMinorTick','on');

采纳的回答

Jatin
Jatin 2024-9-9,17:18
编辑:Jatin 2024-9-11,7:04
If you refer to the documentation on "Graphics Objects Hierarchy," you'll see that the plotting order is based on the sequence in which graphic objects are created. In your code, since the shaded area is plotted last, it should appear on top of the lines.
A solution to this should be using "uistack" function to bring the lines to the front. Apparently, If you go through the following MATLAB Answers post, people have noticed that using "uistack" does not seem to work with "yyaxis" and have adviced to use "SortMethod" property to fix this as a workaround.
Please check if the following workaround is effective for you:
clear; clc; close all;
Data = xlsread("FigureOfMeritResults.xlsx");
% Extract data
Date = Data(469:1908,1);
FoM = Data(469:1908,3);
GHI = Data(469:1908,4);
% Calculate the running average over 5 data points
FoM_avg = movmean(FoM, 5);
GHI_avg = movmean(GHI, 5);
dFoM = zeros(length(FoM),1) + mean(FoM);
ticks = {'12:00AM','4:00AM','8:00AM','12:00PM','4:00PM','8:00PM','12:00AM'};
fz = 15;
%%
fig = figure;
set(gcf,'Color','w','Units','inches')
set(gcf,'Position',[1,1,5,6])
GHI_color = [0.8 0.8 1];
yyaxis left;
p1 = scatter(Date, FoM, 'Marker', '.', 'SizeData', 15, 'MarkerFaceColor', "#0072BD");
hold on;
p2 = scatter(Date, dFoM, 'Marker', '_', 'SizeData', 15, 'MarkerFaceColor', 'black');
hold on;
ax = gca;
ax.YColor = 'k';
yyaxis right;
xData = [Date; flipud(Date)];
yData = [zeros(size(GHI)); flipud(GHI)];
fillHandle = fill(xData, yData, GHI_color,'EdgeColor','none');
hold on;
ax = gca;
ax.YColor = 'k';
xlabel('Time of Day (hrs)', 'FontSize', fz);
numTicks = length(ticks);
tickPositions = linspace(min(Date), max(Date), numTicks);
xticks(tickPositions);
xticklabels(ticks);
set(gca, 'FontSize', fz);
set(gca, 'SortMethod', 'depth')
ax = gca;
box on;
set(ax,'BoxStyle','full','LineWidth',2,'XGrid','off','XMinorTick','off','YGrid','off',...
'YMinorTick','on');
You can know more about 'SortMethod' by referring to the documentation below:
Hope this helps!
  5 个评论
Emily Barber
Emily Barber 2024-9-11,12:43
This worked! Thank you so much!
Jatin
Jatin 2024-9-11,12:56
My pleasure!

请先登录,再进行评论。

更多回答(1 个)

Voss
Voss 2024-9-10,3:12
Data = readmatrix("FigureOfMeritResults.xlsx");
% Extract data
Date = Data(469:1908,1);
FoM = Data(469:1908,3);
GHI = Data(469:1908,4);
% Calculate the running average over 5 data points
FoM_avg = movmean(FoM, 5);
GHI_avg = movmean(GHI, 5);
dFoM = zeros(length(FoM),1) + mean(FoM);
ticks = {'12:00AM','4:00AM','8:00AM','12:00PM','4:00PM','8:00PM','12:00AM'};
fz = 15;
%%
fig = figure;
set(gcf,'Color','w','Units','inches','Position',[1,1,5,6])
GHI_color = [0.8 0.8 1];
xData = [Date; flipud(Date)];
yData = [zeros(size(GHI)); flipud(GHI)];
fillHandle = fill(xData, yData, GHI_color,'EdgeColor','none');
ax1 = gca();
set(ax1, ...
'Box','off', ...
'FontSize',fz);
xlabel(ax1,'Time of Day (hrs)', 'FontSize', fz);
tickPositions = linspace(min(Date), max(Date), numel(ticks));
xticks(ax1,tickPositions);
xticklabels(ax1,ticks);
drawnow
ax1.PositionConstraint = 'innerposition';
ax2 = axes(fig, ...
'Units',ax1.Units, ...
'Position',ax1.Position, ...
'Color','none', ...
'FontSize',fz, ...
'XAxisLocation','top', ...
'YAxisLocation','right', ...
'XTick',tickPositions, ...
'XTickLabel',{}, ...
'PositionConstraint','innerposition', ...
'NextPlot','add');
p1 = scatter(ax2, Date, FoM, 'Marker', '.', 'SizeData', 15, 'MarkerFaceColor', "#0072BD");
p2 = scatter(ax2, Date, dFoM, 'Marker', '_', 'SizeData', 15, 'MarkerFaceColor', 'black');
set([ax1 ax2], ...
'LineWidth',2, ...
'XGrid','off', ...
'XMinorTick','off', ...
'YGrid','off',...
'YMinorTick','on');
linkaxes([ax1 ax2],'x')

类别

Help CenterFile Exchange 中查找有关 Programming 的更多信息

标签

产品


版本

R2023a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by