Reading from Data Logger through Simulink?

1 次查看（过去 30 天）

dj 2015-5-10

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/216083-reading-from-data-logger-through-simulink

Hi.

I'm trying to get Simulink to store data from the force gauge I have (DFG35-10). Here's the link to the product manual: http://www.omega.com/manuals/manualpdf/M5085.pdf

This is part of what it says: "The current reading is transmitted from the gauge when the DATA key is pressed. For continuous output, the gauge also responds to the ASCII command ‘?’ (no quotes), terminated with a Carriage Return character or with a Carriage Return/Line Feed combination. The gauge’s responses are always terminated with a Carriage Return/Line Feed. Any detected errors are reported back by means of error code *10 (illegal command)."

Current settings are as the following: Baud Rate = 9600, Data format = number & units, Data bits = 8, Stop bits = 1, Parity = None, and PORT COM 9

Would anyone know how to design it in Simulink so it would store these data (and even plot at the same time)?

Thanks!