how to build the connection between components from simscape lib and a PMSM not from simscape lib

20 次查看(过去 30 天)
Hi,
How can i build the electrical connection from the bridge node to the PMSM model as marked in below picture?

回答(2 个)

Sabin
Sabin 2025-9-15,10:56
The power electronics is from the Simscape Electrical library while the Machine is from the Simscape Electrical Specialized Power Systems. There is not direct way to connect the two technologies, it can be done using sensors and controlled sources, but it is not the best practice to mix the two technologies. The two technologies have a different approach of solving the equations and by mixing up blocks we may not get the most efficient simulation. There are similar blocks in both technologies. Have you tried using the PMSM block from Simscape?

Zou
Zou 2025-9-15,12:05
Hi Sabin,
Thanks for your feedback.
Yeah, the point that discourages me to use a PMSM from Simscape (such as shown as Pic1 below ) is that i don't know how to retain all the parameters of Motor as the previous one.
Pic1
The detailed parameters of motor for the previous one is shown as below:
Nonetheless, for the new motor, i am not sure whether i use the correct and complete input for the equal parameters.
It's appreciated a lot for your reply.

类别

Help CenterFile Exchange 中查找有关 Choose and Parameterize Blocks 的更多信息

产品


版本

R2023b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by