How can I minimise or eliminate overshoot from PI controller?

24 次查看（过去 30 天）
Zachary
Zachary 2025-9-22
评论： Zachary 2025-9-24
I am trying to control a motor's speed based on torque demand. I have set up a reference torque and reference speed profile, but while the motor is able to track the speed demand relatively well, the torque demand seems to have massive overshoots at the transition points.
The output torque from the motor is as shown:
The input is as shown:
My PI controller parameters are as shown, the gains were achieved via the tuning function:
  4 个评论
显示 2更早的评论
Sam Chak
Sam Chak 2025-9-23
Hi @Zachary
Thank you for your update. However, without the knowledge of the mathematical model, I can only speculate that the overshoot issues were caused by the "zeros" of the closed-loop dynamics, resulting from the step changes in the input signal.
Zachary
Zachary 2025-9-23
@Sam Chak Since the motor is able to track the changes in RPM well, can I assume that the issues stem from the step changes in the torque demand signal? Would a more gradual change in torque demand result in less overshoots?

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Sam Chak
Sam Chak 2025-9-23
编辑：Sam Chak 2025-9-23
Ran in:
Hi @Zachary
In theory, a smooth transient change in the torque demand should be able to reduce the overshoot.
Case 1: Step torque demand
% System
w = 7.108;
sys = tf([5, 2*w, w^2], [1, 2*w, w^2])
sys = 5 s^2 + 14.22 s + 50.52 ----------------------- s^2 + 14.22 s + 50.52 Continuous-time transfer function.
% Step torque demand input signal
U = tf(1);
opt = RespConfig;
opt.Delay = 2;
t = 0:0.01:8;
[u1, tout] = step(U, t, opt);
% System's response to step torque demand
figure
lsim(sys, u1, t), grid on
title('System''s response to step torque demand')
ylim([-0.5, 5.5])
●
Case 2: Smooth torque demand
% Smooth torque demand input signal
u2 = (1 - exp(-2*(t - 2))).*heaviside(t - 2);
% System's response to smooth torque demand
figure
lsim(sys, u2, t), grid on
title('System''s response to smooth torque demand')
ylim([-0.5, 1.5])

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Powertrain Reference Applications 的更多信息

标签

产品


版本

R2025a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by