Simulink Closed-Loop PID Autotuner生​成PLC代码不是完整​的功能块(FB)

2026 1 23
1 个回答
更新时间：2026 3 7
105 次查看（30 天）

0 个投票

Simulink Closed-Loop PID Autotuner通过PLC Coder使用TIA Portal生成PLC代码导入TIA Portal软件中，然后在编程软件中使用"从源生成块"自动生成PLC功能块(FB),是分散的小功能块(如下图所示)，而不是完整的Closed-Loop PID Autotuner功能块(FB)，请问Closed-Loop PID Autotuner模块如何生成的PLC代码导入PLC编程软件中才能生成完整的PLC功能块(FB),功能块接口和Simulink Closed-Loop PID Autotuner一样。

请先登录，再回答此问题。

回答（1 个）

Maithili
Maithili 2026-2-23

0 个投票

Hi @rizhen,
Here are the steps to generate code for the Closed-Loop PID Autotuner block using PLC Coder:
  1. Put the PID Autotuner block into a "subsystem" block
  2. Set that "subsystem" block to be "atomic"
  3. With above two, it should generate one PLC FB
Hope this is helpful, thanks

3 个评论
显示 1更早的评论 隐藏 1更早的评论

rizhen
rizhen 2026-3-2
编辑：rizhen 2026-3-2
Hi,Maithili,
Thank you very much for your explanation. The Simulink model in my diagram is based on an Atomic Subsystem, and code was generated using PLC Coder. However, when importing it into a PLC IDE such as TIA Portal or TwinCAT 3, the blocks are scattered as individual FB blocks instead of appearing as a single, complete FB block like the Closed-Loop PID Autotuner block. If you have tried it, you should also find that this is the case.
Maithili
Maithili 2026-3-5，22:42
Hi @rizhen,
Thank you for the clarification. In addition to generating code for the top-level subsystem, there are also several other functions and function blocks (FBs) generated that serve as utility or helper functions. Together, these components implement the closed-loop PID autotuner subsystem algorithm specified by your model.
However, all you would need to call is the top-level FB, which has the same name as your subsystem. Based on your code, your subsystem is named 'Atomic Subsystem', so the corresponding FB is called 'Atomic'. This FB contains all the code required for the Closed-Loop PID Autotuner implementation.
You can also select the testbench option in the PLC configset option to generate testbench program, which shows how to call the top subsystem FB.
I hope this helps clarify your question.
rizhen
rizhen 2026-3-7，1:41
Hi @Maithili
Thank you so much for your detailed explanation! Your clarification has helped me better understand the structure of the code generation and that I only need to call the top-level FB (i.e., "Atomic") to implement the Closed-Loop PID autotuner functionality. I will also try using the testbench option you mentioned to verify the calling method. Thanks again for your assistance!

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Real-Time PID Autotuning 的更多信息

产品

版本

R2025b

标签

提问:

rizhen
rizhen
2026-1-23

评论：

rizhen
rizhen
2026-3-7，1:41

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!