HDL coder buffer design in Simulink

Question

sameer al-obaidi 2015-6-11

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/223456-hdl-coder-buffer-design-in-simulink

评论： Bharath Venkataraman 2021-3-26

采纳的回答： Bharath Venkataraman

Hi;

How can I Design Buffer in HDL coder by using simulink.

Regards

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Bharath Venkataraman 2015-6-11

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/223456-hdl-coder-buffer-design-in-simulink#answer_182406

编辑：Bharath Venkataraman 2015-6-11

You can use the HDL FIFO block. If that does not meet your needs, there are RAM and counter blocks available in Simulink. You can uses these to build a FIFO.

2 个评论
显示无隐藏无

Catteau Ophélie 2021-3-22

Can you explain please how to do with RAM and counter block ?

Thank you

Bharath Venkataraman 2021-3-26

I need more info on what exactly you are trying to do.

Depending on what you need to do specifically, a simple approach is to write data into the RAM with incremental write address and read it out with a read address that is configured to read out the data from the RAM in the order you desire.

If what you are hoping is to combine a number of successive values and send them out in one shot, you can simply use enabled registers to store the data and send them out together.

请先登录，再进行评论。