PID working with sine wave as reference

26 次查看（过去 30 天）

ashish ahir 2015-6-25

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/225273-pid-working-with-sine-wave-as-reference

评论： Purushottama Rao 2015-7-4

i have seen example of controlling output dc voltage of DC to DC buck converter using PID controller. I want to implement DC to AC converter. I tried using PID controller. Since i am comparing output AC signal(continuously varying) with reference sinusoidal signal, PID controller is not providing expected output. In case of DC to DC, both reference signal was constant. In my case, it is continuously varying sine wave. Can anyone suggest any way to get accurate DC to AC conversion? P.S. Can PID controller work with continuously varying reference signal with high freqency(100Hz)?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Purushottama Rao 2015-6-25

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/225273-pid-working-with-sine-wave-as-reference#answer_183959

PI is a common controller normally used in power electroincs for both DC-DC and DC-AC conversions. We have few systems running with PI controller. D term is not used as it adverse the noise. However in few cases, synchronous frame concept is used where the AC signal is transferred to a synchronous frame where it looks like a dc signal. Then PI controller has to handle only the DC component.

I had experinced using PI controllers upto 100Hz without much issues.