du/dt avoiding in system

8 次查看（过去 30 天）

显示更早的评论

Marcel Büttner 2015-6-28

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/225655-du-dt-avoiding-in-system

评论： Marcel Büttner 2015-6-29

采纳的回答： Stefan

Is there any possibility to solve

x = L*y*s + 2*y , without a du/dt block. ..

(x:output ; y:input)

Just e.g. integrators.

My system is very dynamic and du/dt would cause errors.

6 个评论
显示 4更早的评论隐藏 4更早的评论

Walter Roberson 2015-6-29

Under what circumstances would you get an error from the du/dt block?

Marcel Büttner 2015-6-29

The values would rise too high. The simulation stops cause of infinity.

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Stefan 2015-6-29

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/225655-du-dt-avoiding-in-system#answer_184357

编辑：Stefan 2015-6-29

Two remarks here:

1. If you draw the Bode plot of the transfer function of the derivator, it looks like a line that ramps up with 20 dB/decade. In other words, for high frequencies it amplifies the signal (most likely it is a noise in this region). So, what you want is to avoid this phenomena, however keeping the derivator behavior for lower frequencies. In order to achieve this, replace your derivative block with a transfer function block:

where you have to choose tau sufficiently low. Notice that if tau = 0, then you end up with the derivator H(s) = s.

2. You say something about using integrators. This is possible if you solve your equation the other way around, namely you know x and want to calculate y. The dynamics of y is described by:

dy/dt = (1/L) (2y-x)

For this, you need to know the initial condition y(0) of your system, together with x(t). You code this equation in matlab or Simulink using an integrator block.

2 个评论
显示无隐藏无

Marcel Büttner 2015-6-29

Perfectly explained. Thanks Stefan

Marcel Büttner 2015-6-29

The second remark is not right for this question, cause your input is y and your output is x . As you explained I could only get y as an output value.

请先登录，再进行评论。

类别

RF and Mixed Signal RF Blockset Circuit Envelope Simulation S-Parameters and Linear Components

在 Help Center 和 File Exchange 中查找有关 S-Parameters and Linear Components 的更多信息

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by