How to display characters on image properly?

Question

peyush 2015-7-10

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/229369-how-to-display-characters-on-image-properly

评论： peyush 2015-7-11

I have a sample image, on which "speed" is written with pencil and then erased it completely...I need to display the image in binary format with black background and white characters, having characters properly displayed...can any one help...pls tell me any method at least that I should follow

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2015-7-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/229369-how-to-display-characters-on-image-properly#answer_185683

I'd probably try a tophat or bottomhat filter. They're in the help for the Image Processing Toolbox. Or you could try stdfilt().

8 个评论
显示 6更早的评论隐藏 6更早的评论

Image Analyst 2015-7-11

编辑：Image Analyst 2015-7-11

在 MATLAB Online 中打开

peyush, of course I know it's your project. But it's always better to start with a good image than to try to fix up a bad image before you can even start the main processing. So what I'm saying is, if it's an important project you will do things to get a good image. Like try a profilometer. Or try multispectral imaging. Or try fluorescent imaging? Did you know that most white paper has fluorescent whitening agents (optical brighteners) in it whereas pencil lead and ink probably don't? Have you tried using a "black light" to take a photo? This should make the paper brighter and give more contrast with the writing.

These are the kinds of things a professional engineer would try. We need to look at all possible solutions - not just go with the first thing we think of.

I'm not saying that it can't be done, but it would be SO much easier if you had a good image to start with. For example, you can use sophisticated noise reduction methods like BM3D or non-local means. Did you try anisotropic diffusion or Gabor filters (often used in fingerprint processing)? If so, how did they work. If not, why not?

Why don't you try a Hessian filter like is used to track vessels and fibers, like a Frangi filter: http://www.mathworks.com/matlabcentral/fileexchange/24409-hessian-based-frangi-vesselness-filter?

The anisotropic diffusion demo I attached works perfectly fine. What you did was to paste that in at the bottom of your script. You can't have a function follow a script in the same m-file. You can have two functions though. So if your script is called test.m then you need to have this as the first line of code in test.m

function test()

Then, later on down the file you can have the anisotropic diffusion function. Be sure to alter it so that it uses your image instead of the demo images.

peyush 2015-7-11