Can antenna toolbox be used for Co-site interference analysis?

Question

annie661 2015-7-16

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/230124-can-antenna-toolbox-be-used-for-co-site-interference-analysis

评论： Jeffrey Johnson 2019-5-25

For multiple antenna types (TX and RX), can interference analysis be performed with antenna toolbox?

2 个评论
显示无隐藏无

Shashank Kulkarni 2015-7-27

No, Antenna Toolbox on its own currently cannot be used for interference analysis. However it would be nice to know more about your workflow. Maybe we can do something with Antenna Toolbox and RF Toolbox + SimRF.

Jeffrey Johnson 2019-5-25

To model the transmitter side of the radios: frame up some data packets with headers and CRC, encode at the desired baud rate, modulate these onto a carrier, and model the saturation and/or cross-over distortion of a power amp using an exponentiated raised cosine mapping. Feed this signal, one Fourier component at a time, into transmit antenna. Propagate from transmitter to receiver, through installed radiation patterns and S-parameters. Sum the responses from N-1 transmitters on each victim receiver.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Shashank Kulkarni 2015-10-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/230124-can-antenna-toolbox-be-used-for-co-site-interference-analysis#answer_197083

No, Antenna Toolbox on its own currently cannot be used for interference analysis. However it would be nice to know more about your workflow. Maybe we can do something with Antenna Toolbox and RF Toolbox + SimRF.