How to plot frequency spectrum of a signal in matlab?
483 次查看(过去 30 天)
显示 更早的评论
Hi. I want to plot frequency spectrum of a signal. I got this coding based on the sources that I found from the internet but my lecturer said this is not frequency spectrum. Can somebody help me on this?
close all;
%Define number of samples to take
fs = 8000;
f = 400; %Hz
%Define signal
t = 0:1/fs:1-1/fs;
signal = sin(2*pi*f*t);
%Plot to illustrate that it is a sine wave
plot(t, signal);
title('Time-Domain signal');
%Take fourier transform
fftSignal = fft(signal);
%apply fftshift to put it in the form we are used to (see documentation)
fftSignal = fftshift(fftSignal);
%Next, calculate the frequency axis, which is defined by the sampling rate
f = fs/2*linspace(-1,1,fs);
%Since the signal is complex, we need to plot the magnitude to get it to
%look right, so we use abs (absolute value)
figure;
plot(f, abs(fftSignal));
title('magnitude FFT of sine');
xlabel('Frequency (Hz)');
ylabel('magnitude');
%noise
noise = 2*randn(size(signal));
figure, plot(t,noise), title('Time-Domain Noise');
fftNoise = fft(noise);
fftNoise = fftshift(fftNoise);
figure, plot(f,abs(fftNoise)), title('Magnitude FFT of noise');
xlabel('Frequency (Hz)');
ylabel('magnitude');
%noisy signal
noisySignal = signal + noise;
figure, plot(t,noisySignal), title('Time-Domain Noisy Signal');
fftNoisySignal = fft(noisySignal);
fftNoisySignal = fftshift(fftNoisySignal);
figure, plot(f,abs(fftNoisySignal)), title('Magnitude FFT of noisy signal');
xlabel('Frequency (Hz)');
ylabel('magnitude');
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/150922/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/150924/image.png)
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/150925/image.png)
0 个评论
采纳的回答
Frantz Bouchereau
2021-7-29
编辑:Frantz Bouchereau
2021-7-29
Your code computes FFT and needs some extra normalization steps to calculate true power spectrum.
There are various ways in which you can compute and plot true power spectrum or power spectral density in MATLAB (when I say 'true power spectrum' I mean that the output values correspond to actual power values).
1) If you want to compute the power spectrum without having to specify many parameters and want the function to choose the best parameters for you, you can use pspectrum. Calling the function without outputs will give you a plot with the computed power spectrum.
2) If you want to compute power spectrum or power spectral density and want full control over the window size, window overlap, window type, and number of FFT points, you can use the Welch periodogram pwelch function. Calling the function without outputs will give you a plot with the computed power spectrum.
3) If you want to just visualize the power spectrum, you can use the Signal Analyzer app. The app let's you visualize your signals simultaneously in the time, frequency, and time-frequency domains. You can zoom into signal regions of interest and analyze the spectra at those zoomed regions.
4) If you have split your signals into multiple signal frames you can use the Spectrum Analyzer scope.
Computing true power spectra requires normalization of the FFT and the window used in the computations. Here is a popular MATLAB doc page that explains the relationship between FFT and true power spectra: Power Spectral Density Estimates Using FFT.
0 个评论
更多回答(3 个)
Salaheddin Hosseinzadeh
2015-10-26
Hi there!
I don't know why your instructor didn't like it! Maybe it's missing a division and he is picky on that!
fftNoisySignal = fft(NoisySignal)./numel(NoisySignal);
Maybe that is the case, basically the magnitude of the fft has an issue, I guess! You need to apply this division on every fft command you use.
Hope this helps.
Good luck!
3 个评论
Lazaros Moysis
2021-2-10
Dear Salaheddin, may I ask, in order to compute the spectrum of a signal, why is it required to divide the fft with the length of the signal?
Jonas
2021-5-1
@Lazaros: because a longer signal with the same spectral content would apprar with higher amplitude in the spectrum. if you dont divide, a 2 second sine would have double spectrum amplitude compared to the same sine with only one second. normally in a one sided spectrum you want to see the amplitude of a specific frequency directly, regardless of signal length
Image Analyst
2015-10-26
编辑:Image Analyst
2015-10-26
It's not? I always thought that the FFT gave the frequency spectrum. Why does he say no? Perhaps he would like to see you use pwelch(), periodgram(), or spectrogram() in preference to fft()???
2 个评论
Salaheddin Hosseinzadeh
2015-10-27
As Image Analyst said there are several different methods. Some of which have different names. Power spectrum, Power spectrum density and ... each of which have slightly different method of calculation. Yet, the simple fft is the heart of them, which is performed correctly in your code.
You already accepted my answer, tnx, but if your problem was not and you're looking for something specific search and if no success let me know :)
Good Luck!
Viktor Bolgov
2019-12-1
I do not get it. You have sin wave with frequency 400 Hz and magnitude of 1. Your spectrum indeed shows frequncy 400 Hz, but the magnitude is over 4000! How could it be?
1 个评论
Sandro Yemi Okutuga
2020-8-14
编辑:Sandro Yemi Okutuga
2020-8-14
The analytical Fourier transform of that sinewave is 0 everywhere except for infinite at 400 Hz. The fact that it results only 4000 and not infinite is because the signal is finite in time and the calculation numerical. It wouldn't be 1 anyway.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Spectral Measurements 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!