Image Processing and measurement precision

Question

farzad 2015-10-29

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/251663-image-processing-and-measurement-precision

评论： Image Analyst 2015-10-29

Hi All

I want to find a fast and best way to measure some complex pieces, while there are so many expensive 2D and 3D scanners, I wanted to know how much precise is it to do so, to measure the curves , radius and other complex dimensions ? I tried to take a photo, but noticed that there are a lot of distortions in the photo that show the straight lines curved. So I need to get some advises to how to get an appropriate photo , since most of the scanners, have an operator that they define some points manually, so I have only the coordinated, I wanted to know if the automatic recognition does better work

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2015-10-29

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/251663-image-processing-and-measurement-precision#answer_197771

Automated measurement of the parameters may do a better job than manual tracing but it really depends on how nice the boundary is. If it's really weird looking with lots of complicated structure, it may require some expert knowledge and in that case, manual tracing would be better. A lot of biological images fit into that category.

2 个评论
显示无隐藏无

farzad 2015-10-29

Thank you very much, what type of cameras should be used ? and what are the hints of photography in this case ? my application is industrial dies

Image Analyst 2015-10-29

You should consult a machine vision vendor. You probably can use monochrome cameras, and probably should use telecentric lenses and telecentric illumination. The vendor may have software for simple gauging/calipering operations so you may not need to write anything yourself in MATLAB.

请先登录，再进行评论。