xPc Target network communication

Question

Shelia kk 2012-1-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/25585-xpc-target-network-communication

 Hi,
 I am trying to connect two computers by using network adapters to use xpc target. However I have several problems:
 1. Do the both network adapters have to be compatible with xpc target or only the target pc network adapter is enough?

2. I have formated the target pc and create a FAT32 partition. However I don't know how to set a static IP to the target pc. It is easy in windows but without an operating system how will I know the IP of the target pc?

Thanks

Mat

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Gordon Weast 2012-2-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/25585-xpc-target-network-communication#answer_37001

This setup is the normal one.

The host Ethernet adapter just has to have a Windows driver. You configure that one to use a static IP address. Typically you want to use one of the non-routable address groups to keep the host-target communication off of your larger network.

I typically use 10.10.10.10 for the host static IP address on the second Ethernet adapter in the host. I use that one to talk to any xPC Target boxes I have.

When you configure a kernel for a target, you specify the IP address that it will use. For instance, with the address I've listed above for the host, I'll configure TargetPC1 to 10.10.10.11 in xpcexplr before creating the bootable kernel.

All this is covered in our documentation.