How can I calculate heart rates?
显示 更早的评论
I have a ".txt" file obtained by an ECG, now I need calculate the cardiac frequencies from that ECG. I've built some code but I'm pretty confused, to be able to do the rest. Someone can help me?
clear all
close all
clc
Fs=1000;
%t=1/Fs;
%N = length (x2)
file =importdata('ecg16.txt');
save('ecg16.mat','-struct','file');
load('ecg16.mat');
file1=importdata('ecg16.mat');
sinal=file1.data(:,4);
ecg16=sinal(60001:70000);
t=1/Fs:1/Fs:length(ecg16)/Fs;
figure;
subplot (2,1,1);
plot(t,ecg16);
xlabel('t/s');
title ('ECG without filter')
y = sgolayfilt(ecg16,3,41);
subplot (2,1,2)
%plot(60000:70000,y(60000:70000));
plot (1: 2000, y (1: 2000))
xlabel('t/s')
title ('ECG with filter')
%eixo ([2000 -4 0 4])
%grade
T=0.001:0.001:10;
figure,
plot(T,ecg16);
xlabel('T');
title ('interval ECG');
F=1./T;
figure,
plot(T,F);
xlabel('T');
ylabel('F');
title ('Frequency do ECG');
n=60;
l=length(ecg16);
if n>=l
r=data-mean(ecg16)*ones(l,1);
else
r=zeros(l,1);
for i=1:1:n+1;
r(i)=ecg16(i)-mean(ecg16(1:n+i));
end
for i=l-n+1:1:l;
r(i)=ecg16(i)-mean(ecg16(i-n:l));
end
for i=n+2:1:l-n;
r(i)=ecg16(i)-mean(ecg16(i-n:i+n));
end
end
figure; plot(t,r);
xlabel('t/s');
title('Alinhamento dos picos')
s=(r>0.7*max(r));
i=1;
picos=[];
while i<=length(s)
if s(i)==0 %ignorar os 0s
i=i+1;
else
v=[];
while s(i)==1
v=[v i];
i=i+1;
end
[y j]=max(r(v));
picos=[picos [y;v(j)]];
end
end
figure; hold on
plot(picos(2,:)/Fs,picos(1,:),'.r');
plot(t,r);
xlabel('t/s'); hold off;
title('')
freq = [];
for i=2:length(picos)
freq = [freq ((picos(2,i)-picos(2,i-1))/Fs)^-1]; %f=1/(T(i)-T(i-1))
end
x=picos(2,2:end);
y=freq;
xi = picos(2,2):picos(2,end);
yi = interp1(x,y,xi,'linear');
figure;
hold on;
plot(x/Fs,y,'or');
plot(xi/Fs,yi);
xlabel('t/s');
ylabel('f/Hz');
title('frequency/ time')
hold off;
soma=zeros(1,600);
amostras=zeros(47,600);
for i=1:length(picos)
soma=soma+r(picos(2,i)-300:picos(2,i)+299)';
amostras(i,:)=r(picos(2,i)-300:picos(2,i)+299)';
end
soma=soma/length(picos);
figure;
plot(1/Fs:1/Fs:length(soma)/Fs,soma);
xlabel('t/s');
title ('Onda PQRST')
2 个评论
Walter Roberson
2015-12-27
You need to indicate what you are confused about, or what in your code is not working the way you expect.
Biza Ferreira
2015-12-27
采纳的回答
Star Strider
2015-12-27
I will help you out a bit with the signal processing, and I will let you do the heart rate and all other necessary calculations:
fidi = fopen('Biza Ferreira ecg16.txt', 'rt');
Data = textscan(fidi, repmat('%f', 1, 11), 'Delimiter','\t', 'CollectOutput', 1, 'HeaderLines',8);
fclose(fidi);
Fs = 1000; % Sampling Frequency (Hz)
Fn = Fs/2; % Nyquist Frequency
Ts = 1/Fs; % Sampling Interval (sec)
EKG = Data{:}(:,4); % EKG Data
T = [0:size(EKG,1)-1]*Ts; % Time Vector
Rp = 5; % PAssband Ripple (dB)
Rs = 25; % Stopband Ripple (dB)
Wp = [2 50]/Fn; % Normalised Passband Frequencies
Ws = Wp.*[0.2 1/0.2]; % Normalised Stopband Frequencies
[n,Wn] = buttord(Wp, Ws, Rp, Rs); % Calculate Butterworth Filter Order
[b,a] = butter(n,Wn); % Calculate Butterworth Filter Coefficients
[sos,g] = tf2sos(b,a); % Convert To ‘SOS’ For Stability
EKGf = filtfilt(sos,g,EKG); % Filter Signal
figure(1) % Filter Characteristic (Bode Plot)
freqz(sos, 1024, Fs);
figure(2) % Examine Fidelity Of Filtered EKG Here
plot(T, EKGf)
hold on
plot(T, EKG)
hold off
grid
axis([0 2.5 ylim]) % Comment This Out To See The Entire Trace
legend('Original', 'Bandpass Filtered')
title('Filtered and Unfiltered EKG')
xlabel('Time (sec)')
ylabel('Amplitude (mV)')
[R, Rt] = findpeaks(EKGf, Fs, 'MinPeakHeight',500); % Find R-Waves & Times
figure(3) % Plot Filtered EKG
plot(T, EKGf)
hold on
plot(Rt, R, '^r') % Plot Identified R-Waves
hold off
grid
axis([0 2.5 ylim]) % Comment This Out To See The Entire Trace
legend('EKG', 'R-Wave Peaks')
title('Filtered EKG With R-Wave Locations')
xlabel('Time (sec)')
ylabel('Amplitude (mV)')
It is generally necessary to filter an EKG signal to remove the wandering baseline (usually due to respiratory motion) and high-frequency noise. This EKG had a bit of high-frequency noise, so I used a Butterworth bandpass filter to filter the noise and the baseline drift to get a stable baseline. I then used the findpeaks function to locate the R-waves and their times, since in this EKG it will work for that purpose. The best way to understand this code is to read the documentation on the various functions to understand what they do and how I used them here.
ABNORMAL EKG I am not certain where you got this EKG, and I am not certain what lead it is, but it is distinctly abnormal. The ST segment should be isoelectric in a healthy EKG, and there are about 2 mV of ST segment depression in this one. There is also a degree of electrical alternans in the R-wave amplitudes. The intervals and amplitudes are otherwise within normal limits. The abnormalities could be normal variants, but both need to be investigated with a full workup.
4 个评论
Biza Ferreira
2015-12-27
编辑：Biza Ferreira
2015-12-27
Star Strider
2015-12-27
The best way to read about the functions is to read the documentation in the Signal Processing Toolbox.
You will need to review the documentation on the Bioplux recorder to understand the recording and filtering it uses.
With respect to reading about cardiovascular medicine, your best resource is Braunwald's Heart Disease: A Textbook of Cardiovascular Medicine. A somewhat more condensed discussion on the electrocardiogram itself is ‘Basic ECG Theory, 12-Lead Recordings and Their Interpretation’. The instrumentation involving EKG acquisition is discussed in Webster’s Medical Instrumentation: Application and Design, 4th Ed. and other biomedical engineering textbooks.
Biza Ferreira
2015-12-27
编辑：Biza Ferreira
2015-12-27
Star Strider
2015-12-27
My pleasure.
The peak values are in the ‘R’ vector and their locations in time in ‘Rt’ (in seconds), so the number of R-waves in the recording are the lengths of either vector.
更多回答（0 个）
类别
在 帮助中心 和 File Exchange 中查找有关 Applications 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
