Problems with Data Aquisition Toolbox 2.17 and National Instruments cDAQ-9172

Question

Randy82 2011-3-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2641-problems-with-data-aquisition-toolbox-2-17-and-national-instruments-cdaq-9172

评论： MoeIsKing 2018-11-13

I use Matlab R2010b and have some problems with data acquisition.

I connected a National Instruments cDAQ-9172 chassis via USB and plugged in a NI-9201 analog input module. To acquire data I used the session-based interface like described in chapter 9 (page 9-8) in the user-guide of the data acquisition toolbox. Everything worked fine.

But then, I wanted to use Matlab Simulink to acquire data. I opened the Data Acquisition block library and added the Analog Input block to my model. When I wanted to specify the block parameters the only device that was shown is my soundcard. Why did not appear the cDAQ-Chassis there?

I installed the NI-DAQmx drivers as well as the "old" traditional drivers (Version 7.3).

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Shankar Subramanian 2011-3-28

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2641-problems-with-data-aquisition-toolbox-2-17-and-national-instruments-cdaq-9172#answer_5850

The Data Acquisition Toolbox Simulink Library does not support cDAQ devices yet. Only the MATLAB API supports CompactDAQ devices. This is the reason that you are not seeing the cDAQ devices connected to your system when you drop Analog Input/Output blocks in the model. One way to work around this is to write MATLAB function to acquire data and bring it into Simulink using the MATLAB function block.

HTH, Shankar

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

MoeIsKing 2018-11-13

That is just bad to be honest...

yes you can write an m file to acquire your data and then just "import" it into simulink...

booo

boooo

would be nice if you work on a direct implementation into simulink like the data acquisition toolbox gives in matlab, just unthinkable that it won't integrate to simulink nicely :-/

请先登录，再进行评论。