Arduino Simulink Serial Communication

3 次查看（过去 30 天）

显示更早的评论

semih ucari 2016-3-1

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/270895-arduino-simulink-serial-communication

评论： JUN-RONG CHEN 2020-4-8

Hi ;

I am using the models above. I am transmitting constant 100 to arduino, but I cannot read 100 on the receive scopes. I uploaded them separately and I also uploaded them in the same model. I couldn't read 100 in both ways. What could be wrong?

Thank you.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Qasim Alazze 2016-11-5

hello : Have you gotten answer to your question or solved it??? if you did please help i have same problem ???

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Venkatachala Sarma 2016-3-8

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/270895-arduino-simulink-serial-communication#answer_212747

To the top right of the 'Serial Transmit' and 'Serial Receive' blocks, it says 'ARDUINO'. This means that these blocks execute only inside ARDUINO hardware. You will not be able to use scopes to see the value sent or received by ARDUINO's serial port.

If you would like to transmit '100' serially to any hardware, you have to use 'Serial Configuration' and 'Serial Send' blocks in 'Instrument Control Toolbox'. Also to receive data serially from any hardware, use 'Serial Receive' in the same toolbox.

Hope this helps.