How to connect Intel Real Sense with Matlab??

31 次查看（过去 30 天）
Prasanna Venkatesh
回答： cr 2019-6-17
I am using Intel Real Sense F200 camera. I have a hard time connecting it with my Matlab 2015a. Is there any adaptor that supports Intel Real sense?. Any solution might help. Thanks in advance.

请先登录，再回答此问题。

采纳的回答

Alexandre Soares da Silva
Hi. I developed with a group a small sr300 app for Matlab. It uses the previous SDK (1.0) and I heard back from an user that the depth projectio is misplaced. Since the streams (RGB, infrared, depth) code works, it might be a good start for you (I didn't develop the RGB stream code, but I know it requires a bit of manipulation to be unwrapped on the screen). Here it is: https://github.com/alexandresoaresilva/MATLABrealsense

更多回答（3 个）

Madhura Suresh
Madhura Suresh 2016-9-16
Support for Intel RealSense is being considered for a future release of MATLAB.
Maarten Jansen
Maarten Jansen 2017-3-14
I am using Intel Real Sense sr300 camera. I can read out the depth camera, but it is not clear what the images represent exactly. For a 640x480 depth image the raw data contains a 1280x960x3 data matrix: In a single snapshot 4 camera datasets are captured in a single matrix (2x2 views), 2 images represent depth information and 2 images seem to representing what looks like a grayscale image.
However there seem to be some bitshifts. The depth images seem to be wrapped, indicating that some bitplanes are misplaced. High intensity grayscale values are also wrapped.
Only looking at the wrapped depth images the depth noise seems to be very promising. So I hope to do some fun stuff with this camera, but I first have to solve the decoding problem of the raw images.
Any help is welcome...
  1 个评论
Salvador Blanco Negrete
Salvador Blanco Negrete 2018-1-12
Do you have the sample code? I am using the webcam library, but I get a 2d green image:
webcam with properties:
Name: 'Intel(R) RealSense(TM) Camera SR300 Depth'
Resolution: '640x480'
AvailableResolutions: {'640x480'}

请先登录，再进行评论。

cr
cr 2019-6-17
Realsense cameras (atleast the one I got -SR300) have various channels. E.g. vir = videoinput('winvideo', 3, 'INVZ16_640x480') gives me access to IR channel. IMAQ toolbox with generic OS webcam hardware addon.

类别

在 Help Center 和 File Exchange 中查找有关 C4ISR 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by