How to start Simulink model on Raspberry Pi automatically on startup?

2 次查看（过去 30 天）
Ahmed Desoky
Ahmed Desoky 2016-3-6
编辑： satwant singh 2017-3-30
I have built a Simulink model consisting of three blocks (Pulse generator + Data Type Conversion + GPIO Write) to flash a LED.
I loaded it onto the board, and the model ran normally from the computer in both normal and external modes. The LED was flashing. I stopped the Simulink model and unplugged the power and ethernet cables.
The Simulink model is converted into an executable that runs on the Raspberry Pi board. Typically, the executable is saved in the `/home/pi/Simulink_model_name_rtt/MW/Simulink_model_name` directory. The name of the executable is the same as the Simulink model name.
I ran the operating system of the Raspberry Pi via VNC viewer to execute the Simulink model that exists in MW folder. But the LED wasn't flashing.
Terminal from VNC viewer.
I went to Terminal from PuTTY to execute the Simulink model that exists in the MW folder. It returned the error:
Error setting GPIO pin direction.
Terminal from Putty.
*I want to run the Simulink model* that has been loaded onto the Raspberry Pi board (after Raspberry Pi booting and startup) without running the Simulink model again on the computer via Ethernet connection.

请先登录，再回答此问题。

回答（1 个）

Mark McBroom
Mark McBroom 2016-3-19
you need yo use sudo because the model is accessing pi hardware
sudo ./LED_Test
  2 个评论
wasted
wasted 2016-7-29
Hello Mark!
The Model on my Pi doesn't start with this command.
The Terminal displays:"Starting The Model", but the Model doesn't start and the Pi doesn't seem to be responding afterwards, because I am not able to enter any new commands..
Would be nice to be hearing from you!
wasted
wasted 2016-7-29
Solved it myself:
It is important to press: Deploy to Hardware in Simulink GUI. Pressing "Run" only does not create a standalone application on the raspberry pi (model 2 B). At least that's my experience..

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Raspberry Pi Hardware 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by