清空筛选条件
清空筛选条件

Is the National Instruments PCI-6351 board supported by Simulink Real-Time?

3 次查看（过去 30 天）
Peter Devlin
Peter Devlin 2016-4-12
回答： Peter Devlin 2016-11-14
I am using Simulink Real-Time with an XPC target using a NI PCI-6251 for analog, digital, and counter-timer I/O. Can I build the next machine using a PCI-6351 board? It is not listed as supported hardware. I am hoping the PCI-6251 blocks work.

请先登录，再回答此问题。

回答（2 个）

Peter Devlin
Peter Devlin 2016-11-14
Since asking this question, I have found that the National Instruments PCI 6351 does seem to work just fine using the PCI 6251 blocks. I am using the analog in and out, digital in and out, and one counter-timer for a quadrature encoder. This is good to know as it is hard to find motherboards with PCI slots anymore.
Ryan Santos
Ryan Santos 2016-4-15
编辑：Ryan Santos 2016-4-15
Hello Peter,
As you mentioned, the National Instruments PCI-6351 board is not listed in the supported hardware list below:
http://www.mathworks.com/hardware-support/simulink-desktop-real-time.html?s_tid=srchtitle
Therefore the hardware is not officially supported. It is possible that it may still work, but it is out of the expected workflow in Simulink Real-Time, and may cause issues.
Thanks,
Ryan Santos

类别

在 Help Center 和 File Exchange 中查找有关 Target Computer Setup 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by