GigE camera (FLIR AX-5) no image

Question

Hsin-Feng Hsu 2016-6-2

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/286897-gige-camera-flir-ax-5-no-image

评论： Hsin-Feng Hsu 2016-6-21

Image acquisition does recognize the camera and shows the correct supported one format. I pressed the format, the program enters endless loading status (a rotating ring). I tried core 2 processor, core i5, and an i7-3920xm with K3000M. All result in the same rotating ring. The camera works fine with FLIR researchIR software. What wrong is it and how to resolve it? Thanks for your patient help.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Madhura Suresh 2016-6-3

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/286897-gige-camera-flir-ax-5-no-image#answer_224308

在 MATLAB Online 中打开

Hi Hsin,

I guess you are using IMAQTOOL. Instead of using that, can you try the command line?

To get the gige devices, run

hwinfo = imaqhwinfo('gige')

Then, create a videoinput object using:

v = videoinput('gige',1)

Preview frames using:

preview(v)

Look at source properties using:

src = v.Source

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Hsin-Feng Hsu 2016-6-21

在 MATLAB Online 中打开

Thank you for good advice. Sorry you for replying late since I just recover my license for trying too many computer for this in short time.

The ans for imaqhwinfo is

ans =

    InstalledAdaptors: {'gentl'}
        MATLABVersion: '9.0 (R2016a)'
          ToolboxName: 'Image Acquisition Toolbox'
       ToolboxVersion: '5.0 (R2016a)'

The response of the suggested commands is

Error using imaqhwinfo (line 109) Invalid ADAPTOR specified. Type 'imaqhwinfo' for a list of installed ADAPTORs. Image acquisition adaptors may be available as downloadable support packages. Open Support Package Installer to install additional vendors.

Any more suggestions for this? Thanks for your patient help.

请先登录，再进行评论。