ANN

13 次查看（过去 30 天）
Malathy
Malathy 2012-2-24
评论： Walter Roberson 2019-9-20
My input array is
35.0000 1.0000 1.2500 0.5000
65.0000 1.0000 1.2500 0.5000
35.0000 2.0000 1.2500 0.5000
65.0000 2.0000 1.2500 0.5000
35.0000 1.0000 1.7500 0.5000
65.0000 1.0000 1.7500 0.5000
35.0000 2.0000 1.7500 0.5000
65.0000 2.0000 1.7500 0.5000
35.0000 1.0000 1.2500 1.0000
65.0000 1.0000 1.2500 1.0000
35.0000 2.0000 1.2500 1.0000
65.0000 2.0000 1.2500 1.0000
35.0000 1.0000 1.7500 1.0000
65.0000 1.0000 1.7500 1.0000
35.0000 2.0000 1.7500 1.0000
65.0000 2.0000 1.7500 1.0000
20.0000 1.5000 1.5000 0.7500
80.0000 1.5000 1.5000 0.7500
50.0000 0.5000 1.5000 0.7500
50.0000 2.5000 1.5000 0.7500
50.0000 1.5000 1.0000 0.7500
50.0000 1.5000 2.0000 0.7500
50.0000 1.5000 1.5000 0.2500
50.0000 1.5000 1.5000 1.2500
50.0000 1.5000 1.5000 0.7500
50.0000 1.5000 1.5000 0.7500
50.0000 1.5000 1.5000 0.7500
50.0000 1.5000 1.5000 0.7500
50.0000 1.5000 1.5000 0.7500
50.0000 1.5000 1.5000 0.7500
My output array is
7.9700
15.2200
9.5300
12.6000
9.4400
13.1600
9.8100
11.6500
8.4700
14.0500
9.5000
11.7000
7.0900
11.1000
6.6900
10.4400
6.2900
14.8800
12.2500
10.3800
10.6500
9.5000
10.1600
10.6500
11.1300
11.5000
11.1000
10.9900
10.9800
11.0300
I used Neural Network tool(nntool). I clicked new in the network data manager and in the create network page I selected the Network type as Feed-forward backprop
Input data in a variable'c' as given above and selected it from the dropdown box and the target data 'd' same. other parameters like training function & Adaption learning function and Performance function as default values.
If I need only one hidden layer, Do I need to set the number of layers as 1?
Similarly I set the number of neurons as 3 for layer1 & the transfer function as LOGSIG and created the network by name network1. Now I opened the network and clicked the Train tab. In the training info I selected the Training Data Input as c and target as d and clicked Train. But I am not getting the ANN predicted output value corresponding to each input value.
Please help me at the earliest.

请先登录，再回答此问题。

采纳的回答

Malathy
Malathy 2012-2-29
we use the SIM function to see the predicted response of the ANN.

更多回答（2 个）

Greg Heath
Greg Heath 2012-2-24
If you plot output vs each of the inputs you will see that each plot consists of 3 vertical lines. The best model I can think of is a 2nd order polynomial that will intersect each line approximately in the middle.
Hope this helps.
Greg
  1 个评论
Malathy
Malathy 2012-2-24
My question here is how to see the predicted response of ANN

请先登录，再进行评论。

Greg Heath
Greg Heath 2012-3-4
ANN : Malathy asked on 24 Feb 2012 at 7:49
My input array is
-----SNIP
My output array is
-----SNIP
I used Neural Network tool(nntool). I clicked new in the network data manager and in the create network page I selected the Network type as Feed-forward backprop
Input data in a variable'c' as given above and selected it from the dropdown box and the target data 'd' same. other parameters like training function & Adaption learning function and Performance function as default values.
If I need only one hidden layer, Do I need to set the number of layers as 1?
% NO. The number of weight layers is 2 (input-hidden and hidden- output)
Similarly I set the number of neurons as 3 for layer1 & the transfer function as LOGSIG
% TANSIG is preferred because inputs are transformed (via default MAPMINMAX) to be bipolar.
and created the network by name network1. Now I opened the network and clicked the Train tab. In the training info I selected the Training Data Input as c and target as d and clicked Train. But I am not getting the ANN predicted output value corresponding to each input value.
Please help me at the earliest.
% You'll have to quantify your performance.
% I ran 10 trials each for H = 0:4 (H=0 is just a linear regression but you need to use H = [] in newff). The summary statistics for an adjusted R^2 obtained from all of the data are tabulated below. If Ntrneq is the number of training equations and Nw is the number of weights to be estimated, the adjusted MSEtrn is obtained from SSEtrn/(Ntrneq-Nw)to reduce the optimistic bias caused by using the same data that was used in estimating the weights. Validation and Test error estimates are not usually adjusted even though the validation data is used in the design.
%Ignoring the default Ntrn/Nval/Ntst division 0.6/0.2/0.2, I just used all of the data to obtain MSEa = Neq*MSE/(Neq-Nw).
H = 0 1 2 3 4
minR2a = 0.7797 0.1428 0.1497 0.5269 0.4192
meanR2a = 0.8207 0.7342 0.7733 0.8689 0.8363
medianR2 = 0.8222 0.8199 0.8479 0.9062 0.9015
stdR2a = 0.0262 0.2267 0.2312 0.1461 0.1841
maxR2a = 0.8622 0.8599 0.9573 0.9969 0.9876
As you can see, for H = 3 and 4, the best of 10 designs yields R2a ~ 0.99.
Hope this helps.
Greg

类别

在 Help Center 和 File Exchange 中查找有关 Modeling and Prediction with NARX and Time-Delay Networks 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by