How to display the coordinate system of the figure (UCS icon)?

Question

yu sh 2016-9-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/302058-how-to-display-the-coordinate-system-of-the-figure-ucs-icon

回答： George Abrahams 2024-3-20

I have a 3D object having irregular shape and volume changing along the axes direction. I want to show the coordinate system icon in the figure associated with that object so that when I will rotate the object it will also change,like available in different CAD/CAE systems. How can I get this in MATLAB?

2 个评论
显示无隐藏无

Henry Giddens 2016-9-6

I normally plot this myself in the corner of the axis using the 'line' and 'text' functions. As long as you use these, and not the annotation, then they will rotate with the associated axis. You wont have the arrowheads however.

I don't know whether it can just be turned on but I have never come across it.

yu sh 2016-9-6

Thanks Henry I don't need arrowheads, do you have a written code for it?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Henry Giddens 2016-9-6

2
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/302058-how-to-display-the-coordinate-system-of-the-figure-ucs-icon#answer_233932

编辑：Henry Giddens 2016-9-9

在 MATLAB Online 中打开

Hi yu, Yes I have done it a few times. You should be aware that this will work for me because the scale on each axis is equal. For example:

%before this you have plotted a surface in axis hAx
axis(hAx,'equal')
%Get X, Y and Z data for plotting the axes...
X_range = hAx.XLim(2) - hAx.XLim(1);
X_start = hAx.XLim(1);
X_delta = X_range/20;
Y_delta = (hAx.YLim(2) - hAx.YLim(1))/20;
Y_start = hAx.YLim(1);
Z_delta = (hAx.ZLim(2) - hAx.ZLim(1))/20;
Z_start = hAx.ZLim(1);
X_Line = line(hAx,[X_start+X_delta X_start+X_delta*5],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta]); % x Line
Y_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta*5],[Z_start+Z_delta Z_start+Z_delta]); % Y Line
Z_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta*5]); %Z Line
X_text = text(hAx,X_start+X_delta*6,Y_start+Y_delta,Z_start+Z_delta,'x');
Y_text = text(hAx,X_start+X_delta,Y_start+Y_delta*6,Z_start+Z_delta,'y');
Z_text = text(hAx,X_start+X_delta,Y_start+Y_delta,Z_start+Z_delta*6,'z');

You can then play around with how long you want each line, the colors of the lines and text etc... I tend to use linkprop to link the properties of the lines that need to stay the same. If you do not have equal axis scales, this method wont really work...

Henry

11 个评论
显示 9更早的评论隐藏 9更早的评论

Henry Giddens 2016-9-9

编辑：Henry Giddens 2016-9-9

在 MATLAB Online 中打开

Maybe if I could see the variable 'N2_aggpores' ?

Using the matlab example for isosurface, which I imagine is similar to your code, you just do something like this. However, if you dont use the line "axis(hAx,'square')" Im not sure all the lines will be of equal length, so you might have to play around with it a bit.

[x y z v] = flow;
q = z./x.*y.^3;
p = patch(isosurface(x, y, z, q, -.08, v));
isonormals(x,y,z,q, p)
p.FaceColor = 'interp';
p.EdgeColor = 'none';
daspect([1 1 1]); axis tight; 
colormap(prism(28))
camup([1 0 0 ]); campos([25 -55 5]) 
camlight; lighting phong
hAx = gca;
axis(hAx,'equal')
axis(hAx,'square');
%Get X, Y and Z data for plotting the axes...
X_range = hAx.XLim(2) - hAx.XLim(1);
X_start = hAx.XLim(1);
X_delta = X_range/20;
Y_delta = (hAx.YLim(2) - hAx.YLim(1))/20;
Y_start = hAx.YLim(1);
Z_delta = (hAx.ZLim(2) - hAx.ZLim(1))/20;
Z_start = hAx.ZLim(1);
X_Line = line(hAx,[X_start+X_delta X_start+X_delta*5],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta]); % x Line
Y_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta*5],[Z_start+Z_delta Z_start+Z_delta]); % Y Line
Z_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta*5]); %Z Line
X_text = text(hAx,X_start+X_delta*6,Y_start+Y_delta,Z_start+Z_delta,'x');
Y_text = text(hAx,X_start+X_delta,Y_start+Y_delta*6,Z_start+Z_delta,'y');
Z_text = text(hAx,X_start+X_delta,Y_start+Y_delta,Z_start+Z_delta*6,'z');
axis(hAx,'off');
view([29 22]);

I hope this helps.

P.S. I have edited the orignal answer as it contained some errors from when i originally copied it over...

Henry

Henry Giddens 2016-9-9

编辑：Henry Giddens 2016-9-9

在 MATLAB Online 中打开

So when I run this code:

% load required array for drawing object  
load N2_aggpores
%%%%%%%Redrawing %%%%%%%%%%%%%
Ss_P1= smooth3(N2_aggpores,'gaussian',3); %smooth surface
hFig = figure;
hAx = gca;
hiso_P1 = patch(isosurface(Ss_P1,5,'isovalue'),'FaceAlpha',0.2,...  % surface view
'FaceColor',[0 1 1],...
'EdgeColor','none');
hcap_P1 = patch(isocaps(N2_aggpores,5),...   % cover(cross section) view
'FaceColor','interp',...
'EdgeColor','none');
colormap copper
hold on 
view(70,12)
%axis on
daspect([1,1,1])
% camzoom(1.4)
% camproj perspective
% lightangle(-40,25); 
lightangle(-55,15)
camlight; lighting phong
X_range = hAx.XLim(2) - hAx.XLim(1);
X_start = hAx.XLim(1);
X_delta = X_range/40;
Y_delta = (hAx.YLim(2) - hAx.YLim(1))/40;
Y_start = hAx.YLim(1);
Z_delta = (hAx.ZLim(2) - hAx.ZLim(1))/40;
Z_start = hAx.ZLim(1);
X_Line = line(hAx,[X_start+X_delta X_start+X_delta*5],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta]); % x Line
Y_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta*5],[Z_start+Z_delta Z_start+Z_delta]); % Y Line
Z_Line = line(hAx,[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta],[Z_start+Z_delta Z_start+Z_delta*5]); %Z Line
X_text = text(hAx,X_start+X_delta*6,Y_start+Y_delta,Z_start+Z_delta,'x');
Y_text = text(hAx,X_start+X_delta,Y_start+Y_delta*6,Z_start+Z_delta,'y');
Z_text = text(hAx,X_start+X_delta,Y_start+Y_delta,Z_start+Z_delta*6,'z');
view([29 22])
axis(hAx,'off');

I get this figure. Presumably it is similar to what you want. Like i said, you can customize and decide where to place the lines by changing the X_start, X_delta values etc, but that is up to you. I hope this helps.

Henry

yu sh 2016-9-9

Its finally working Henry! I have just removed 'hAx' from the text function and it works perfect. Thanks again it is of great for me. Btw my version is 2015a.

Divin Xavier 2021-1-8

编辑：Divin Xavier 2021-1-8

在 MATLAB Online 中打开

Instead of Line command you could use annotation to get the arrow heads (version 2020b)

X_Line = annotation('textarrow',[X_start+X_delta X_start+X_delta*1.5],[Y_start+Y_delta Y_start+Y_delta],'Color','k'); % x Line
Y_Line = annotation('textarrow',[X_start+X_delta X_start+X_delta],[Y_start+Y_delta Y_start+Y_delta*1.5],'Color','k'); % Y Line

请先登录，再进行评论。

Answer 2

George Abrahams 2024-3-20

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/302058-how-to-display-the-coordinate-system-of-the-figure-ucs-icon#answer_1428451

在 MATLAB Online 中打开

Heres what I think is a pretty nice solution. The coordinate system bases (arrows) are plotted with my plotframe function on File Exchange.

% The main axes containing the object or data of interest.
axObj = axes;
[ X, Y, Z ] = peaks( 25 );
mesh( axObj, X, Y, Z ./ 3 )
% The small, corner axes containing the coordinate system plot.
axIcon = axes( Position=[0.75 0.75 0.2 0.2] );
plotframe( Parent=axIcon, LabelBasis=true )
% Synchronise the axes cameras.
linkprop( [axObj axIcon], [ "View", "CameraUpVector" ] );
% Some beautification.
set( gcf, Color=axObj.Color )
set( axIcon, CameraViewAngleMode="manual", ...
    Color="none", XColor="none", YColor="none", ZColor="none" )
set( [axObj axIcon], DataAspectRatio=[1 1 1], PlotBoxAspectRatio=[1 1 1], View=[50 30] )

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

How to display the coordinate system of the figure (UCS icon)?

2 个评论
显示无隐藏无

采纳的回答

11 个评论
显示 9更早的评论隐藏 9更早的评论

更多回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

How to display the coordinate system of the figure (UCS icon)?

2 个评论 显示 无隐藏 无

采纳的回答

11 个评论 显示 9更早的评论隐藏 9更早的评论

更多回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

2 个评论
显示无隐藏无

11 个评论
显示 9更早的评论隐藏 9更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论