Can any1 please explain me what does X= 0.01 : 0.01 : 2; and li=30/72 meant in ECG signal generation using Fourier series work done by R.KARTHIK sir. Iam new in MATLAB.Its very urgent.

3 次查看（过去 30 天）
Meha Gadkari
Meha Gadkari 2016-9-16
评论： Meha Gadkari 2016-9-19
x=0.01:0.01:2;
default=input('Press 1 if u want default ecg signal else press 2:\n');
if(default==1)
li=30/72;
a_pwav=0.25;
d_pwav=0.09;
t_pwav=0.16;
a_qwav=0.025;
d_qwav=0.066;
t_qwav=0.166;
a_qrswav=1.6;
d_qrswav=0.11;
a_swav=0.25;
d_swav=0.066;
t_swav=0.09;
a_twav=0.35;
d_twav=0.142;
t_twav=0.2;
a_uwav=0.035;
d_uwav=0.0476;
t_uwav=0.433;
else
rate=input('\n\nenter the heart beat rate :');
li=30/rate;
%p wave specifications
fprintf('\n\np wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_pwav=0.25;
d_pwav=0.09;
t_pwav=0.16;
else
a_pwav=input('amplitude = ');
d_pwav=input('duration = ');
t_pwav=input('p-r interval = ');
d=0;
end
%q wave specifications
fprintf('\n\nq wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_qwav=0.025;
d_qwav=0.066;
t_qwav=0.166;
else
a_qwav=input('amplitude = ');
d_qwav=input('duration = ');
t_qwav=0.166;
d=0;
end
%qrs wave specifications
fprintf('\n\nqrs wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_qrswav=1.6;
d_qrswav=0.11;
else
a_qrswav=input('amplitude = ');
d_qrswav=input('duration = ');
d=0;
end
%s wave specifications
fprintf('\n\ns wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_swav=0.25;
d_swav=0.066;
t_swav=0.09;
else
a_swav=input('amplitude = ');
d_swav=input('duration = ');
t_swav=0.09;
d=0;
end
%t wave specifications
fprintf('\n\nt wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_twav=0.35;
d_twav=0.142;
t_twav=0.2;
else
a_twav=input('amplitude = ');
d_twav=input('duration = ');
t_twav=input('s-t interval = ');
d=0;
end
%u wave specifications
fprintf('\n\nu wave specifications\n');
d=input('Enter 1 for default specification else press 2: \n');
if(d==1)
a_uwav=0.035;
d_uwav=0.0476;
t_uwav=0.433;
else
a_uwav=input('amplitude = ');
d_uwav=input('duration = ');
t_uwav=0.433;
d=0;
end
end
pwav=p_wav(x,a_pwav,d_pwav,t_pwav,li);
%qwav output
qwav=q_wav(x,a_qwav,d_qwav,t_qwav,li);
%qrswav output
qrswav=qrs_wav(x,a_qrswav,d_qrswav,li);
%swav output
swav=s_wav(x,a_swav,d_swav,t_swav,li);
%twav output
twav=t_wav(x,a_twav,d_twav,t_twav,li);
%uwav output
uwav=u_wav(x,a_uwav,d_uwav,t_uwav,li);
%ecg output
ecg=pwav+qrswav+twav+swav+qwav+uwav;
figure(1)
plot(x,ecg);

请先登录，再回答此问题。

回答（1 个）

Luuk van Oosten
Luuk van Oosten 2016-9-16
X= 0.01:0.01:2;
means X-values vary from 0.01 to 2 with a step size of 0.01. So you end up with X being 200 values equally spaced (with 0.01) in the range 0.01 and 2. My best guess is that this is your time window (or whatever values you have on your X-axis for your ECG).
li=30/72
means that the value specified as 'li' has the value of 30/72, commonly known as 0.4172. The 72 refers here to heartbeat (in rest, I guess). If your heartbeat goes up, li goes down and vice versa.
  5 个评论
显示 3更早的评论
Walter Roberson
Walter Roberson 2016-9-16
You need to read the documentation that was provided as part of that File Exchange Submission as unfortunately there is no useful comments in the source.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 ECG / EKG 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by