Adding EMG Signal With 50Hx Sinosoidal wave. Not getting it correct

1 次查看（过去 30 天）
Amit jha
Amit jha 2016-10-17
评论： Christoph F. 2016-11-4
Start Time =0.00025, time interval=0.00025 and end time=12.715
I have loaded emg signal of above specified time and adding it to 50Hz noise (sinosoidal Signal), but not getting it correctly, please reply
Thanks in Advance
emg = load('emg_healthy.txt');
figure(1);
subplot(3,3,1);
plot(emg(:,1), emg(:,2));
title('original EMG Signal');
t=0.00025:0.00025:12.715;
freqNoise = 50;
amplNoise =0.0025;
myNoise = amplNoise.*sin(2*pi.*t.*freqNoise);
[a b]=size(emg);
myNoisetransp=transpose(myNoise);
[u v]=size(myNoisetransp)
for j=1:(b-v)
myNoisetransp(:,j+1)=0;
end
subplot(3,3,2);
plot(t,myNoise);
title('50HZ Sinosoidal PL Noise');
noisysig=emg+myNoisetransp;
subplot(3,3,3);
plot(t,noisysig);
title('EMG+PL Noise');
Graph is generated but sinosoidal wave is not overlapped with EMG Signal

请先登录，再回答此问题。

采纳的回答

Christoph F.
Christoph F. 2016-10-17
What is the scale of
emg(:,2)
myNoise may have a different scale than emg(:, 2) and become too small to display once the two signals are added.
  3 个评论
显示 1更早的评论
Amit jha
Amit jha 2016-10-18
this is the problem, when i am adding sinosoidal signal with emg signal, emg is separeted as green and sinosoidal as blue, Refer in figure titled EMG+PL Noise and help on basis of above code
Thanks in advance
Christoph F.
Christoph F. 2016-11-4
noisysig=emg+myNoisetransp;
plot(t,noisysig);
emg has (at least) two columns, with time information in the first column (emg(:, 1)) and voltage information in the second column (emg(:, 2)).
To add the generated noise to the emg voltage column, try
noisysig = emg(:, 2) + myNoisetransp;
(The jpg shows two vectors being plotted in the third graph: the emg voltage vector in green, and the time vector plus added noise in blue.)

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Spectral Measurements 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by