dc machine as dc motor
显示 更早的评论
I want to use the dc machine block in the Sim Power Systems as a dc motor but the inputs are mechanical torque and speed. Where should i take the mechanical output from? Could you please elaborately explain how to operate the dc machine in its two modes
采纳的回答
Arnaud Miege
2011-3-16
1 个投票
Select Torque TL to specify a torque input, in N.m, and change labeling of the block's input to TL. The machine speed is determined by the machine Inertia J and by the difference between the applied mechanical load torque TL and the internal electromagnetic torque Te. The sign convention for the mechanical torque is the following: when the speed is positive, a positive torque signal indicates motor mode and a negative signal indicates generator mode.
Select Speed w to specify a speed input, in rad/s, and change labeling of the block's input to w. The machine speed is imposed and the mechanical part of the model (Inertia J) is ignored. Using the speed as the mechanical input allows modeling a mechanical coupling between two machines and interfacing with SimMechanics and SimDriveline models.
Did you look at the demo power_dcmotor.mdl?
HTH,
Arnaud
更多回答（1 个）
Akinlara
2011-4-15
0 个投票
What if the DC machine is been run on battery power without a torque load. what parameters do i need to change
1 个评论
Arnaud Miege
2011-4-15
The battery power is electrical power, that's different from mechanical. Surely, the DC machine shaft is connected to something?
社区
类别
在 帮助中心 和 File Exchange 中查找有关 Powertrain Blockset 的更多信息
2011-3-14
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
