清空筛选条件
清空筛选条件

Hydraulic lift model via Simscape tool

5 次查看（过去 30 天）
Mirsad
Mirsad 2016-12-25
回答： Steve Miller 2022-12-7
Hi everybody,
I have a trouble with hydraulic lift model. I try to explain briefly what the question is. For instance, there is a rack and pinion system and this system creates a force applied to piston. There is also another piston that helps to lift 50 kg mass by the effect of first piston movement. It is a basic hydraulic system actually. I firstly obtain torque from dc motor and convert it into force by rack and pinion model. Now, I had translation force that can be applied to piston. I used translational electromechanical converter and convert force to pressure. The problem has started after then. How to set relation between first piston and second? how to provide transmission. If I modeled the transmission, then the process will be easier. I will find the pressure occurred in piston two. Then convert into force by translational electromechanical converter. Finally, It will be applied to the lifting mass. I need to model two piston transmission. Could anyone have a knowledge on it? any effort will be appreciated. Thank you
  1 个评论
John D'Errico
John D'Errico 2016-12-25
编辑：John D'Errico 2016-12-26
If you have a problem, then show what you have done. Otherwise you force anyone who would help to do your homework from scratch, and that is not the goal of Answers. Make it easy for someone to help you. That way you are more likely to get help.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

Steve Miller
Steve Miller 2022-12-7
Without your model, it is difficult to provide a specific answer. I believe you need to look at product of the ratios for all components that convert energy (rotational <-> translational <-> pressure <-> electrical ...).
--Steve

类别

在 Help Center 和 File Exchange 中查找有关 Simscape 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by