EM Simulation of modified capacitor structure

Question

Robert Smolarz 2017-1-9

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/319548-em-simulation-of-modified-capacitor-structure

编辑： halleyhit 2017-1-11

Hello everyone.

I need your expertise about EM simulations in the Matlab environment. I want to make a simulation of structure which is a tube (made from teflon material) in which on the top and the bottom will be placed plates (electrodes). Next I want to "stimulate" it by using pulse source. Mainly I want to place some material with different epsilon between those plates. And now: a) there is posibility to simulate such a structure ? (tube in which we have plates) b) can I make import of 3D EM model from the CST Microwave Office ans simulate in properly in the Matlab ? c) how can I observe electric field distribution ?

Best Regards

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

halleyhit 2017-1-9

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/319548-em-simulation-of-modified-capacitor-structure#answer_249821

What you want to solve is a partial differential equation (EQS or MQS equations). In matlab, PDEtool may help you. However, I think it can solves 2D problem only. New vision like 2016b or later may solve 3D problem, but I am not sure. Personally, Comsol, which originates from PEDtool, is a better tool to your simulation.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Robert Smolarz 2017-1-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/319548-em-simulation-of-modified-capacitor-structure#answer_249998

halleyhit thank you for your response.

I followed to your advice about usage of the Comsol. Well, I never before used it, so I have some problems. I have designed model of this modified capacitor (see attachment). Right now I want to simulate it by using a damped sinusoid (attachment) as a source connected to the upper connector of structure (named connector_top). The lower connector (connector_bottom) - to the ground (GND). Can you help me with this ?

Best Regards, R.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

halleyhit 2017-1-10

编辑：halleyhit 2017-1-11

1. You use a quite new vision Comsol, and I can't open this file. Sorry.

2. I guess you use "ACDC/electric currents (ec)" physics. If so, you can right click the physics and then add electric potential and ground. To use damped sinusoid wave, you may build a function in global definitions.

3. Comsol is quite easier than matlab, and you may find more help in its model libraries.

请先登录，再进行评论。