simulation time in Simulink

2012 3 12
2 个回答
回答已采纳
更新时间：2022 12 14
8 次查看（30 天）

0 个投票

I'm a recent user of Simulink. I would like to know whether the simulation stop time 24 is correct to simulate 24 hours (and so the signal in input has to be referred to a day of measurations with time = 24) or I have to indicate 3600s*24 = 86'400 as a simulation stop time (and so the input daily signal has to be created upon 86400s). Thank you for your precious help.

请先登录，再回答此问题。

 采纳的回答

Kaustubha Govind
Kaustubha Govind 2012-3-12

1 个投票

The simulation time is specified in seconds, so you would need to use 86400 to set a day's duration. (Note however that this doesn't mean the simulation will run for 24hrs in real-time, just that the data you provide is used as if provided for a 24hr period)

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Doug Eastman
Doug Eastman 2012-3-12
I would say this is generally the convention, but really for base Simulink the time value is unitless. So if you want you could make the time unit hours and 24 would simulate one day. You just need to be consistent in all your blocks, for example the frequency parameter in the Sine Wave block would then correspond to cycles/hour.
Valentina
Valentina 2012-3-12
So, if I have 24 temperature's values, one for each hour in a day, and I would like to use the simulation time equal to 86400s, i have to create a signal of temperature with 3600 values identical in each hour, isn't it?
Doug Eastman
Doug Eastman 2012-3-12
No, when you specify input to Simulink you need to use a time vector and a data vector. So the vector only needs points where you want. For example, if you are using seconds as the time unit you might use the following as the data in a From Workspace block:
[0 T1;60*60 T2; 60*60*2 T3; 60*60*3 T4; 60*60*4 T5; ...]
The first column (0, 60*60, ..) corresponds to the times and the second column (T1, T2, ...) corresponds to the temperatures at those times.
You can choose whether you want to interpolate between the temperature values or hold them until the next reading.
Valentina
Valentina 2012-3-16
Thank you very much Doug.

请先登录，再进行评论。

更多回答（1 个）

mehdi azari
mehdi azari 2021-2-25

1 个投票

I want to change the simulation time from seconds to minutes and hours. How should I do this?

2 个评论
显示 无 隐藏 无

Nasifah Zailan
Nasifah Zailan 2021-2-27
please let me know if you got the answer. thank you.
Basant Ale
Basant Ale 2022-12-14
Did anyone get the answer?

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Sources 的更多信息

产品

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by