Hi Ryan,
I had a look at your model. Overall your model looks meaningful to me.
Here a few comments:
- If you are starting with Simscape, make sure you watch all video of the training carefully. You will start from scratch and build your models gradually. By jumping within or between the videos you may miss important points.
- I suggest you work with an ideal torque source first before replacing by an actual engine. Hereby you can check whether the torque is enough to obtain the desired accelerations.
- Find attached an example for tabulated torque data for an engine. Make sure you rename the variables accordingly
- You can use callbacks (File -> Model Properties -> Callbacks) to execute code when opening / running the model. Consider running the scripts containing all the parameters here.
- CTRL + R can be used to rotate blocks. That's clearly nitpicking ;-)
In hope that is helpful.
Cheers Christoph
PS I didn't see the same behavior as you were observing. That's mainly because I had to come up with my own tire data and tabulated torque data (find attached) as you only submitted your model without its parameters.
