while using FMINCON can we pass matrices as arguments while using calling objective function saved as seperate file

1 次查看（过去 30 天）
Krishna prasad K
Krishna prasad K 2017-2-20
评论： Krishna prasad K 2017-2-20
I'm using FMINCON . I saved my objective function in a seperate file. can i pass matrices as arguments while calling the objective function from main program.? if yes can i access the individual elements of the matrix?
call from main program is given below
[x,fval]=fmincon(@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k),x0,A,b,Aeq,beq,lb,ub,@(x)nonlcon(x,i,SOC1,PVpow,Pabrmp,Pplc,Psm,V1ref,k));
here PVpow,Pabrmp,Psm,Pplc are matrices

请先登录，再回答此问题。

采纳的回答

John D'Errico
John D'Errico 2017-2-20
Yes. You can pass in any arguments you wish, matrices or not.
If you can pass them into a function, why would you think you cannot access individual elements of those matrices? Of course you can.
It seems apparent that you hd a problem, because otherwise, this question makes little sense. But if you got an error, then show it.
The function handle that you show:
@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k),
encapsulates the current value of those variables from the caller workspace, passing them into fun. fun can use those arguments in any way you wish.
  3 个评论
显示 1更早的评论
John D'Errico
John D'Errico 2017-2-20
编辑：John D'Errico 2017-2-20
Aw, give me a break! :) I can't read that pic without a microscope. :) :) I'm not old. Just age challenged.
The error message suggests what you did.
"Undefined function 'mtimes' for input arguments of type 'cell'."
So, one or more of those "arrays" is actually a cell array. I don't know which one, because there are a lot of multiplies in the line that had the error.
The point is though, you cannot multiply cell arrays. So lets try an example to show you what happens.
C = {1 2 3 4 5}
C =
1×5 cell array
[1] [2] [3] [4] [5]
C(1)*2
Undefined operator '*' for input arguments of type 'cell'.
The problem is, C(1) is still a cell array. I can extract that element though. So, this will work:
C{1}*2
ans =
2
Why does this happen?
C(1)
ans =
cell
[1]
C{1}
ans =
1
Because when you index a cell array with round parens, the result is another cell array. When you use curly braces, the result will be extracted from its cell array form.
You can also extract the elements of a cell array into a regular flat array using tools like cell2mat:
cell2mat(C)
ans =
1 2 3 4 5
D = cell2mat(C)
D =
1 2 3 4 5
D*pi
ans =
3.1416 6.2832 9.4248 12.566 15.708
Krishna prasad K
Krishna prasad K 2017-2-20
thanks again for your time sorry for that screen shot :)
as per your instruction i used curl brackets to access the elements of the cell array. then the following error is shown
Cell contents reference from a non-cell array object.
Error in fun (line 2)
f=EC{i+1}*{1/3}*{Pabrmp{i+1}+Psm{i+1}+Pplc{i+1}-PVpow{i+1}-x{k-i}-x{k-2*i+72}}+.055*(1/3)*x{k-2*i+72} +
EC{i+2}*{1/3}*{Pabrmp{i+2}+Psm{i+2}+Pplc{i+2}-PVpow{i+2}-x{k-i+1}-x{k+1-2*i+72}}+.055*(1/3)
Error in
@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k)
Error in fmincon (line 601)
initVals.f = feval(funfcn{3},X,varargin{:});
Error in predprog (line 50)
[x,fval]=fmincon(@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k),x0,A,b,Aeq,beq,lb,ub,@(x)nonlcon(x,i,SOC1,PVpow,Pabrmp,Pplc,Psm,V1ref,k));
Caused by: Failure in initial user-supplied objective function evaluation. FMINCON cannot continue.
>>

请先登录，再进行评论。

更多回答（1 个）

Krishna prasad K
Krishna prasad K 2017-2-20
thanks again for your time sorry for that screen shot :)
as per your instruction i used curl brackets to access the elements of the cell array. then the following error is shown
Cell contents reference from a non-cell array object.
Error in fun (line 2)
f=EC{i+1}*{1/3}*{Pabrmp{i+1}+Psm{i+1}+Pplc{i+1}-PVpow{i+1}-x{k-i}-x{k-2*i+72}}+.055*(1/3)*x{k-2*i+72} +
EC{i+2}*{1/3}*{Pabrmp{i+2}+Psm{i+2}+Pplc{i+2}-PVpow{i+2}-x{k-i+1}-x{k+1-2*i+72}}+.055*(1/3)
Error in
@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k)
Error in fmincon (line 601)
initVals.f = feval(funfcn{3},X,varargin{:});
Error in predprog (line 50)
[x,fval]=fmincon(@(x)fun(x,i,EC,PVpow,Pabrmp,Pplc,Psm,V1ref,k),x0,A,b,Aeq,beq,lb,ub,@(x)nonlcon(x,i,SOC1,PVpow,Pabrmp,Pplc,Psm,V1ref,k));
Caused by: Failure in initial user-supplied objective function evaluation. FMINCON cannot continue.
>>

类别

在 Help Center 和 File Exchange 中查找有关 Characters and Strings 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by