'daq.getVendors()', this was the output:
Data acquisition vendor 'National Instruments':
-------
_ _ID: 'ni'
FullName: 'National Instruments'
AdaptorVersion: '3.8 (R2015b)'
DriverVersion: 'unknown'
IsOperational: false
> daqsupport('ADAPTOR','myfile.txt') which outputs this on my system:
----
----------General Information ----------
Current Time & Date:
10-Apr-2017 14:52:17
Operating System:
Microsoft Windows [Version 10.0.14393]
Hardware Configuration:
x86 Family 6 Model 42 Stepping 7, GenuineIntel
The measured CPU speed is 3201 MHz
RAM is 10179 MB
Swap space is 20071 MB
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_ARCHITEW6432 = undefined
MATLAB version:
8.6.0.267246 (R2015b)
Data Acquisition Toolbox version:
Name: 'Data Acquisition Toolbox'
Version: '3.8'
Release: '(R2015b)'
Date: '13-Aug-2015'
MATLAB License Number:
838860
----------MATLAB root directory: ----------
C:\Program Files\MATLAB\R2015b
----------Data Acquisition Toolbox directory: ----------
C:\Program Files\MATLAB\R2015b\toolbox\daq
----------DAQ Session Based Vendors Available: ----------
Data acquisition vendor 'National Instruments':
ID: 'ni'
FullName: 'National Instruments'
AdaptorVersion: '3.8 (R2015b)'
DriverVersion: 'unknown'
IsOperational: false
[Warning: Diagnostic Information from vendor: NI: There was a driver error while
loading the MEX file to communicate with National Instruments hardware.
It is possible that the NI-DAQmx driver is not installed or is older than
the required minimum version of '9.1'.
Additional information:
'Invalid MEX-file 'C:\Program Files\MATLAB\R2015b\toolbox\daq\daq\+daq\+ni\+NIDAQmx\private\mexNIDAQmx.mexw64': The specified module could not
be found.']
----------DAQ Session Based Devices Available: ----------
No data acquisition devices available.
