HOW TO DESIGN A BANDPASS FILTER

1 次查看（过去 30 天）

raj 2012-3-30

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/34031-how-to-design-a-bandpass-filter

I need to design a bandpass filter with sampling rate of 10kHz and bandpass of 0 to 1kHz and then insert a signal my signal in the filter can any one give the syntax for it

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

采纳的回答

Wayne King 2012-3-30

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/34031-how-to-design-a-bandpass-filter#answer_42696

在 MATLAB Online 中打开

You need a lowpass filter. You can use fdesign.lowpass. There are many possible specification strings. You have not stated all your specs, like how many dB of attenuation you wish to have. I'll create an example with 50 dB and obtain both an FIR filter (Hd1) and an IIR filter(Hd2)

   d = fdesign.lowpass('Fp,Fst,Ap,Ast',1000,1200,0.5,50,1e4);
   Hd1 = design(d,'equiripple');
   Hd2 = design(d,'butter');
   t = 0:1e-4:1;
   x = cos(2*pi*500*t)+0.5*cos(2*pi*2000*t)+randn(size(t));
   out = filter(Hd1,x);
   % or out = filter(Hd2,x);