Allowing for code to work different with file names

Question

Aaron Smith 2017-5-25

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/341918-allowing-for-code-to-work-different-with-file-names

编辑： Stephen23 2017-7-5

I have a code that works fine but i have thus far only used it with a single test file. As a result of this i could run it while specifying the filename as well as the folder inside the code itself:

f1d = fopen(fullfile(sbd,'TEST_A.asc'),'rt');

Now that i need to apply it to multiple different files the code will not work. I have tried including a colon to read all files (as there is only one) but this doesn't work as the matlab error says there is no file name given. Can I not just specify the folder from which to select the file and the code read whatever files are in the folder?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Image Analyst 2017-5-25

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/341918-allowing-for-code-to-work-different-with-file-names#answer_268422

在 MATLAB Online 中打开

Aaron, if you just want the user to pick some file instead of using dir() or sprintf() to build/get the filename, do this:

% Have user browse for a file, from a specified "starting folder."
% For convenience in browsing, set a starting folder from which to browse.
startingFolder = 'C:\Program Files\MATLAB';  % Whatever you want.....
if ~exist(startingFolder, 'dir')
  % If that folder doesn't exist, just start in the current folder.
  startingFolder = pwd;
end
% Get the name of the file that the user wants to use.
defaultFileName = fullfile(startingFolder, '*.*');
[baseFileName, folder] = uigetfile(defaultFileName, 'Select a file');
if baseFileName == 0
  % User clicked the Cancel button.
  return;
end
fullFileName = fullfile(folder, baseFileName)

10 个评论
显示 8更早的评论隐藏 8更早的评论

Aaron Smith 2017-5-26

在 MATLAB Online 中打开

I tried this out but i still get an invalid file identifier error:

sbd = uigetdir('C:\Users\c13459232\Documents\MATLAB'); % Generate command window to choose a folder
if ~isdir(sbd) % if the directory is not a valid path
errorMessage = sprintf('Error: the following file does not exist: \n%s', sbd); % print this error message
uiwait(warndlg(errorMessage)); % block the execution of program and wait to resume
return;
end
% Get the name of the file that the user wants to use.
defaultFileName = fullfile(sbd, '*.*');
[baseFileName, folder] = uigetfile(defaultFileName, 'Select a file');
if baseFileName == 0
  % User clicked the Cancel button.
  return;
end
outFolder = fullfile(sbd, 'output'); % build full file name from parts in folder 'Output'
mkdir(outFolder); % create folder
f2d = fopen(fullfile(outFolder,'temp_01.asc'),'wt'); %open the files that are being written
f1d = fopen((defaultFileName),'rt'); %open the original file to be read
k = 0;
while ~feof(f1d)                %find the end of the file
    str = fgetl(f1d);           %Read the original file line by line removing deliimiters 
    [row,~,~,idx] = sscanf(str,'%d'); %ignore the first number on each line
    if row==1
        k = k+1;
        fclose(f2d);
        fnm = fullfile(outFolder,sprintf('temp_%02d.asc',k));
        f2d = fopen(fnm,'wt');
    end
    fprintf(f2d,'%s\n',str(idx+1:end));
end
fclose(f1d); %close the original TEST_A file
fclose(f2d); %close the new file
message = sprintf( 'Task Complete' );
uiwait(msgbox(message));
Error using feof
Invalid file identifier.  Use fopen to generate a valid file identifier.

I wrote another piece of code yesterday but i got an error that baffles me slightly as it doesn't seem like it should be an error:

sbd = uigetdir('C:\Users\c13459232\Documents\MATLAB'); % Generate command window to choose a folder
if ~isdir(sbd) % if the directory is not a valid path
errorMessage = sprintf('Error: the following file does not exist: \n%s', sbd); % print this error message
uiwait(warndlg(errorMessage)); % block the execution of program and wait to resume
return;
end
fullFileName = fullfile(folder, baseFileName)
filePattern = fullfile(sbd, '*.asc');
Files = dir(filePattern);
for length(Files)
    f1d = fopen((filePattern),'rt');
end
outFolder = fullfile(sbd, 'output'); % build full file name from parts in folder 'Output'
mkdir(outFolder); % create folder
f2d = fopen(fullfile(outFolder,'temp_01.asc'),'wt');
k = 0;
while ~feof(f1d)
    str = fgetl(f1d);
    [row,~,~,idx] = sscanf(str,'%d');
    if row==1
        k = k+1;
        fclose(f2d);
        fnm = fullfile(outFolder,sprintf('temp_%02d.asc',k));
        f2d = fopen(fnm,'wt');
    end
    fprintf(f2d,'%s\n',str(idx+1:end));
end
fclose(f1d); %close the original TEST_A file
fclose(f2d); %close the new file
message = sprintf( 'Task Complete' );
uiwait(msgbox(message));

The error occurs in this line: for length(Files) It states that the first parenthesis is invalid

Aaron Smith 2017-5-26

编辑：Aaron Smith 2017-5-26

在 MATLAB Online 中打开

I removed the code you referred to and the dir() on filepattern. I have an invalid file identifier error again which from my experience means i am getting closer >:D But in this case it is back where I started before editing the code originally

sbd = uigetdir('C:\Users\c13459232\Documents\MATLAB'); % Generate command window to choose a folder
if ~isdir(sbd) % if the directory is not a valid path
errorMessage = sprintf('Error: the following file does not exist: \n%s', sbd); % print this error message
uiwait(warndlg(errorMessage)); % block the execution of program and wait to resume
return;
end
filePattern = fullfile(sbd, '*.asc');
Files = filePattern;
outFolder = fullfile(sbd, 'output'); % build full file name from parts in folder 'Output'
mkdir(outFolder); % create folder
f2d = fopen(fullfile(outFolder,'temp_01.asc'),'wt');
f1d = fopen((Files), 'rt');
k = 0;
while ~feof(f1d)
    str = fgetl(f1d);
    [row,~,~,idx] = sscanf(str,'%d');
    if row==1
        k = k+1;
        fclose(f2d);
        fnm = fullfile(outFolder,sprintf('temp_%02d.asc',k));
        f2d = fopen(fnm,'wt');
    end
    fprintf(f2d,'%s\n',str(idx+1:end));
end
fclose(f1d); %close the original TEST_A file
fclose(f2d); %close the new file
message = sprintf( 'Task Complete' );
uiwait(msgbox(message));
Warning: Directory already exists. 
Error using feof
Invalid file identifier.  Use fopen to generate a valid file identifier.

Jan 2017-5-26

编辑：Jan 2017-5-26

在 MATLAB Online 中打开

Nobody told you to omit the dir for the filePattern, but fopen(filePattern) does not work. Now you code contains again:

Files = filePattern;
f1d   = fopen((Files), 'rt');

As said already: This must fail. FOPEN requires a file name, not a pattern. I assume you need:

FileList   = dir(filePattern);
FileName   = {FileList.name};
FileName(ismember(FileName, {'.', '..'})) = [];  % To be safe
File       = fullfile(sbd, FileName{1});
[f1d, msg] = fopen(File, 'rt');
if f1d == -1
  error('Cannot open file: "%s": %s', File, msg);
end

Always check the output of fopen and display the corresponding message. You see how tedious it is to debug a failing file opening. Never never never let the output of fopen unchecked. There are too many corresponding threads in this forum, which show that being lazy and saving these code lines can cost you days for debugging.

You can avoid the warning:

if ~exist(outFolder, 'dir')
  mkdir(outFolder);
end

And? What did I told you? Better use:

if ~exist(outFolder, 'dir')
  [Status, Msg] = mkdir(outFolder);
  if Status ~= 1
     error('Cannot create folder: "%s": "%s"', outFolder, Msg);
  end 
end

Aaron Smith 2017-5-26

在 MATLAB Online 中打开

Thanks Jan, I had tried the fopen(filePattern) with the dir still in but the problem was that i was still trying to open files using file pattern rather than listing the files and then opening the first in the list. This is what my code looks like now and it appears to be working:

sbd = uigetdir('C:\Users\c13459232\Documents\MATLAB'); % Generate command window to choose a folder
if ~isdir(sbd) % if the directory is not a valid path
errorMessage = sprintf('Error: the following file does not exist: \n%s', sbd); % print this error message
uiwait(warndlg(errorMessage)); % block the execution of program and wait to resume
return;
end
filePattern = fullfile(sbd, '*.asc');
FileList   = dir(filePattern);
FileName   = {FileList.name};
FileName(ismember(FileName, {'.', '..'})) = [];  % To be safe
File       = fullfile(sbd, FileName{1});
[f1d, msg] = fopen(File, 'rt');
if f1d == -1
  error('Cannot open file: "%s": %s', File, msg);
end
outFolder = fullfile(sbd, 'output'); % build full file name from parts in folder 'Output'
if ~exist(outFolder, 'dir')
  [Status, Msg] = mkdir(outFolder);
  if Status ~= 1
     error('Cannot create folder: "%s": "%s"', outFolder, Msg);
  end 
end
f2d = fopen(fullfile(outFolder,'temp_01.asc'),'wt');
k = 0;
while ~feof(f1d)
    str = fgetl(f1d);
    [row,~,~,idx] = sscanf(str,'%d');
    if row==1
        k = k+1;
        fclose(f2d);
        fnm = fullfile(outFolder,sprintf('temp_%02d.asc',k));
        f2d = fopen(fnm,'wt');
    end
    fprintf(f2d,'%s\n',str(idx+1:end));
end
fclose(f1d); %close the original TEST_A file
fclose(f2d); %close the new file
message = sprintf( 'Task Complete' );
uiwait(msgbox(message));
guidata(hObject, handles);

I have just a few more questions about why you included some stuff: The %to be safe line is just to insure that the filename is there, right?

What is the purpose of msg and the [status,msg] line in general?

Thanks again. I had been wallowing in fixing and crating errors for some time.

Jan 2017-5-26

在 MATLAB Online 中打开

This line removed the entries '.' and '..' from the output of the dir() command. In your case they will not appear, because aou are searching for '*.asc'. But if you re-use the code snippets in other programs, this might be useful:

FileList = dir(fullfile(cd, '*.'));
fprintf('%s\n', FileList.name)

Then you see the '.' and '..', which are current folder and parent folder.

There is no general meaning of "status, msg". For the fopen and mkdir command, the first output is a flag to reply the success status and msg contains an error message in case of problem, such that the user do not have to guess, what the problem is. See:

doc fopen
doc mkdir

Aaron Smith 2017-5-26

Thanks a million :)

请先登录，再进行评论。

Answer 2

Stephen23 2017-5-25

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/341918-allowing-for-code-to-work-different-with-file-names#answer_268408

编辑：Stephen23 2017-5-25

How to read multiple files is explained extensively in the documentation, on this forum, and in the wiki:

https://www.mathworks.com/help/matlab/import_export/process-a-sequence-of-files.html

https://www.mathworks.com/matlabcentral/answers/57446-faq-how-can-i-process-a-sequence-of-files

http://matlab.wikia.com/wiki/FAQ#How_can_I_process_a_sequence_of_files.3F

etc

The first thing to decide is if you want to generate the file names, or if you want to read the names of existing files:

generate names: use sprintf and fullfile.
read names: use dir and fullfile.

You can find some examples with my FEX submission natsortfiles:

http://www.mathworks.com/matlabcentral/fileexchange/47434-natural-order-filename-sort

2 个评论
显示无隐藏无

Aaron Smith 2017-5-25

编辑：Aaron Smith 2017-5-25

Thanks Stephen. I am only processing a single file but i could use the code for importing multiple but is there no simpler way to simply select the folder and then matlab processes the file that is inside?. I am trying to read the file that exists inside the folder, not generate a file name

Stephen23 2017-6-14

编辑：Stephen23 2017-7-5

@Aaron Smith: and if you read my answer you will see that I covered that too:

"read names: use dir and fullfile."

请先登录，再进行评论。

Allowing for code to work different with file names

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

10 个评论
显示 8更早的评论隐藏 8更早的评论

更多回答（1 个）

2 个评论
显示无隐藏无

另请参阅

类别

标签

产品

Community Treasure Hunt

Allowing for code to work different with file names

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

10 个评论 显示 8更早的评论隐藏 8更早的评论

更多回答（1 个）

2 个评论 显示 无隐藏 无

另请参阅

类别

标签

产品

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

10 个评论
显示 8更早的评论隐藏 8更早的评论

2 个评论
显示无隐藏无