Point Spread Function of an optical system
155 次查看(过去 30 天)
显示 更早的评论
Hi all,
I need to estimate the PSF of an optical system. I have all the parameters and have been following an excellent code that was mentioned in the 'Spherical aberration and Chromatic aberration' question ( https://de.mathworks.com/matlabcentral/answers/36064-spherical-aberration-and-chromatic-aberration ). I am trying to model the PSF of an optical system and then apply it to an image to see how blurry the image would be.
Everything works great but the only problem is the pixel sampling. With the code I am having trouble with the psf_sampling. My psf_sampling is larger (10e-6) and every time I run the code I get the following error:
'Sampling is not sufficient to reconstruct the entire wavefront.'
Please help me with this, much appreciated.
Kind regards,
Vanessa
%%Define parameters
clear all;close all;
psf_sampling = 0.5e-6;%focal plane sampling in meters
lambda = 0.6328e-6;%wavelength in meters
N = 256;
aperture_diameter = 0.0254;%meters; 1 inch
focal_length = 5*aperture_diameter;%meters
RMS_SA = 0.25;%RMS spherical aberration content in waves
%%Calculate pupil plane sampling
delta_fx = 1/(psf_sampling*N);
x_pupil = (-fix(N/2):fix((N-1)/2)) * delta_fx * lambda * focal_length;
[X_pupil,Y_pupil] = meshgrid(x_pupil);
R_pupil = sqrt(X_pupil.^2 + Y_pupil.^2);
R_norm = R_pupil/(aperture_diameter/2);%Pupil normalized to aperture diameter
assert(max(R_norm(:))>=sqrt(2),'Sampling is not sufficient to reconstruct the entire wavefront.');
%%Create wavefront
W = RMS_SA * sqrt(5) * (6*R_norm.^4 - 6*R_norm.^2 + 1);%Spherical Aberration wavefront
W(R_norm>1) = 0;
E = exp(1i*2*pi*W);%Complex amplitude
E(R_norm>1) = 0;%Impose aperture size
figure;imagesc(angle(E)/(2*pi));colorbar;title('Wavefront Phase (waves)');
%%Create point-spread function
psf = abs(fftshift(fft2(ifftshift(E)))).^2;
psf = psf/sum(psf(:));%Normalize to unity energy
x_psf = (-fix(N/2):fix((N-1)/2)) * psf_sampling;
figure;imagesc(x_psf*1e6,x_psf*1e6,psf);
title(sprintf('PSF with %.4f waves RMS of Spherical Aberration', RMS_SA));
xlabel(sprintf('Position (\\mum)'));
ylabel(sprintf('Position (\\mum)'));
1 个评论
FEDERICO DALLA VECCHIA
2023-12-6
Hello, i have a question for Vanessa. I don't understand why you wrote this: x_pupil = (-fix(N/2):fix((N-1)/2)) * delta_fx * lambda * focal_length; for to calculate the out pupil? So tou have a camera with this specification: 0.5e-6 dimension of pixel and N = 256 of Resulution right?
回答(2 个)
Eric
2017-6-20
Sorry, I was out on vacation for a couple weeks, then I posted to
https://www.mathworks.com/matlabcentral/answers/36064-spherical-aberration-and-chromatic- aberration
Here's that response:
The assert statement is checking that the sampling allows reconstruction of the entire wavefront. If this assertion fails, then the pupil sampling is such that you cannot reconstruct the entirety of the wavefront area. This can happen if the pixel pitch is relatively large. Assuming you don’t want to adjust the aperture diameter, you need to increase the values in R_norm.
For instance, if I set the psf_sampling to 10e-6 meters, the code from the page results in max(R_norm(:)) of 0.4475.
A simple fix is to calculate the PSF at a finer resolution and then bin that PSF to the desired low-resolution. So for the case where you want a PSF sampling of 10 microns, you could calculate the PSF at a sampling of 2.0 microns. Calculate the psf as shown in the script. Then do the following:
kernel = ones(5,5)/5^2;
psf_lowres_all = conv2(psf, kernel, 'same');
psf_lowres = psf_lowres_all(3:5:end,3:5:end);
In this case you’re doing convolution to spatially sum 5x5 neighborhoods of the high-resolution PSF (5 is the correct value because it’s the ratio of the desired low-resolution pixel spacing to the calculated spacing). This convolution produces 25 possible low-resolution PSFs, each at a different registration of the optical PSF to the pixel grid. In the last line I’ve selected the one in the middle. In the indexing you skip by 5 because you want to get sums of adjacent blocks (i.e., not sliding blocks). You can change the indexing to select another possible low-resolution PSF. For instance, you could also use
psf_lowres = psf_lowres_all(1:5:end,4:5:end);
to select another PSF.
You’ll notice when this is done that the wavefront calculation area is zero-padded to be larger than the specified system aperture. You can check this by plotting abs(E).
3 个评论
Eric
2017-6-20
One more suggestion:
If possible, I would do the entire image simulation in the high-resolution space and then downsample the blurred image.
That is, if you're working with simulated imagery, simulate the imagery at the 2 micron sampling as well (or any value less than 2.5 such that the Q of your system is 2 or higher). Convolve the high-resolution image with the high-resolution PSF. Then do the convolution with the kernel function and extraction of a representative image. This isn't always possible (e.g., the image you're blurring is measured), but if it is possible it most accurately represents information at aliased spatial frequencies.
Image Analyst
2017-6-6
Decrease psf_sampling back to the range where it is valid. If you sample the PSF too coarsely, you're not going to be able to get it's shape at all.
6 个评论
Eric
2017-6-20
If you comment out the assert statement, you'll get poor results. You will reconstruct a wavefront that is smaller than the aperture of your system.
另请参阅
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!