Control Thorlabs Stages at Command Line

Question

Timothy Burg 2017-7-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347624-control-thorlabs-stages-at-command-line

评论： LAKSHMIVENKATA SAIKUMAR 2023-10-2

Stage_Motor_Control.m

Hello,

I have written a code that creates a figure containing four controls that move three axes and a rotary stage when the 'jog' buttons are clicked with a mouse. They are Thorlabs stages (one CR1-Z7 and three Z825B) controlled by Thorlabs APT software. They work fine, but now I'm trying to control the stages at the command line instead of clicking the up and down arrows on each control in the figure. I know the serial number of each stage, but I'm not sure how to specifically call one stage to move and also how to change the position of that stage. The range of motion of the axes stages is 0-25 mm and the rotary stage can rotate 0-360 degrees. I have attached the code. I am welcome to any and all suggestions!

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

LAKSHMIVENKATA SAIKUMAR 2023-10-2

Hi

Timothy Burg, I am sai kumar pursuing graduation in Mechanical engineering I am doing a class project which requires to controlling a 3-axis machine and making it to move in a desired trajecory , if you are you able to control the stages at the command line instead of clicking the up and down arrows on each control ? could you please share your file.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Nagarjuna Manchineni 2017-7-19

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347624-control-thorlabs-stages-at-command-line#answer_274793

I believe you are trying to control the stages using keyboard keys instead of clicking on the push buttons in the figure using a pointing device (like mouse). You can use the '' event and call the respective callback function based on the key.

Refer to the following page that discusses various events:

https://www.mathworks.com/help/matlab/creating_guis/write-callbacks-using-the-guide-workflow.html?searchHighlight=keypressfcn&s_tid=doc_srchtitle

Also, refer the following MJATLAB Answers posts for an example,

https://www.mathworks.com/matlabcentral/answers/1450-gui-for-keyboard-pressed-representing-the-push-button#answer_2120

https://www.mathworks.com/matlabcentral/answers/210241-gui-how-to-call-callback-function-from-keyboard-using-windowkeypressfcn#answer_175778