MATLAB pause does not seem to work

Question

Dong-Kyeong Lee 2017-7-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347805-matlab-pause-does-not-seem-to-work

编辑： TADA 2019-2-21

I am currently using the pause function to see if a file is growing or not.

 while 1
  file1 = file.bytes
  pause (60)
  file2 = file.bytes
  if file1 == file2
    display('File stopped growing')   
    break
  end
 end

However, after running it for 1~2 days, MATLAB skips the pause and thinks that the file is not growing anymore. Is there a way to fix this issue?

For example, I get this message:

       name: 'xxx.bin'
       date: '07-Jul-2017 13:03:14'
      bytes: 7.981710180352000e+12
      isdir: 0
    datenum: 7.368835439120370e+05
       name: 'xxx.bin'
       date: '07-Jul-2017 13:03:14'
      bytes: 7.981710180352000e+12
      isdir: 0
    datenum: 7.368835439120370e+05

7 个评论
显示 5更早的评论隐藏 5更早的评论

Dong-Kyeong Lee 2017-7-28

在 MATLAB Online 中打开

In the original post, I posted the MATLAB output. In 60 seconds (pause of 60), the file should have grown (the file grows every millisecond). However, the file has not grown, and the file has been checked at the same time instead of after 1 minute.

(I have checked that the file is continuously growing, so the file not updating after 60 seconds is not the case here.)

I added "clock" before both file.byte, so that clock is run before and after the pause. The clock returned

          7           25           12            6       9.6134
          7           25           12            7       9.8243
          7           25           12            7       9.8243
          7           25           12            7       9.8243

Jan 2017-7-28

在 MATLAB Online 中打开

No, you did show some output and some code, but the output cannot be created by the shown code:

file1 = file.bytes
pause (60)
file2 = file.bytes

It is not clear why you assume "file.bytes" to have changed here. And this code will not produce the message:

       name: 'xxx.bin'
       date: '07-Jul-2017 13:03:14'
      bytes: 7.981710180352000e+12
      isdir: 0
    datenum: 7.368835439120370e+05

which seems to be the output of a dir command.

Now you have posted some output from a clock command:

          7           25           12            6       9.6134
          7           25           12            7       9.8243
          7           25           12            7       9.8243

But we have to guess which code creates this output.

I still assume, that there is a bug in your code. You still did not answer the questions for clarifications I've posted 3 week ago: How has "file" been created? How is it updated between the calls?

You wrote "the fact that MATLAB decides not to carry out pause or tic/toc". But it is still not clear, why you assume that this is a fact.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Jan 2017-7-28

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347805-matlab-pause-does-not-seem-to-work#answer_275852

Perhaps it is a kind of overflow in a time counter of the pause command. I do not understand, what you did with tic/toc, please post the code if this is important.

I'd suggest to use a timer instead of a pulling loop with pause.

5 个评论
显示 3更早的评论隐藏 3更早的评论

Jan 2017-7-28

在 MATLAB Online 中打开

What is the purpose of this code? You check if the first call to pause waits for more than 5 seconds. All subsequent calls to toc will reply something like 10, 20, 30, ... seconds. Maybe the internal counter uses a signed integer and you get an overflow. So what about:

pause_check = 1;
while pause_check
    tic;
    c1 = clock;
    pause(10);
    c2 = clock;
    pause_check_var = toc;
    if pause_check_var < 9.9
        disp(c1)
        disp(c2)
        disp(etime(c2, c1))
        % Perhaps you have shadowed "pause.m"?
        which pause -all
        pause_check = 0;
    end
end

Unfortunately you still did not explain, what the program should do. Do you want to display a message in the command window, if the file does not grow anymore? Then what about using the last access time in the file browaser of the operating system? Or are you interested in possible internal problems of the pause command for a bug report? What is the problem you want to solve? Would a timer be a solution?

We are discussing this problem for 3 weeks now and it is still not clear to me which problem you want to solve, which code you run to get the shown output and how you exactly get to your impression, that there is a problem with pause. There is a great potential to improve the efficiency of the discussion.

Dong-Kyeong Lee 2017-7-28

在 MATLAB Online 中打开

Dear Jan Simon,

Thank you for the comments, and I am sorry if I was not clear.

The file is growing because an IF logger is logging the data using a separate C++ code. It is just dumping all incoming data into a file, so it is growing every millisecond (about 100GB an hour)

I want to display a message and send an email if the file is no longer growing, because that would mean that the dumper or the antenna feed is problematic.

My question is, if pause is not working, is this a bug? If it is, are there are any methods to bypass this issue?

My reason behind why pause does not seem to be working is that, using the below code, (or using pause instead), when I display the file information after the supposed pause, it gives the same time. (For both file information, and clock.) When I used tic/toc, it broke after 4 days, but I did not have the display message in the code, so cannot confirm the value of toc at the time of error.

As you mentioned, I will try use the timer instead and see if the issue persists.

Another reason why I think it is the MATLAB pause, tic/toc issue is that, when I put in a large amount of loop instead of pause (Doing basic summation 10000 times), MATLAB was running fine for over a week without any problems. However, I thought that this would not be good for the machine, so decided not to use this method.

The entire code is currently using tic/toc

 fnames = dir('*.bin');
 while 1
      oldBytes = fnames(1).bytes;
      disp(fnames(1))
      clock
      pause_check = 1;
      tic;
      while pause_check
          pause(10);
          pause_check_var = toc
          if pause_check_var>5
              pause_check = 0;
          end
      end
      newBytes(i) = fnames(1).bytes;
      disp(fnames(1))
      clock
      if oldBytes == newBytes
          disp('File not growing')
          break
      end
 end
mail = 'xxxx';
password = 'xxxx';
server = 'smtp.gmail.com';
setpref('Internet','E_mail',mail);
setpref('Internet','SMTP_Server',server);
setpref('Internet','SMTP_Username',mail);
setpref('Internet','SMTP_Password',password);
props = java.lang.System.getProperties;
props.setProperty('mail.smtp.auth','true');
props.setProperty('mail.smtp.socketFactory.class', ...
    'javax.net.ssl.SSLSocketFactory');
props.setProperty('mail.smtp.socketFactory.port','465');
% Send mail
recipients = 'xxxx'
body = 'File is not growing'
sendmail(recipients,subject,body);

Walter Roberson 2017-7-28

You need to call dir() again to get the new bytes value.

Dong-Kyeong Lee 2017-8-9

Even without calling dir again, it seems to update the number of bits. However, by using timer, the issue seems to have been resolved for the time being

请先登录，再进行评论。

Answer 2

TADA 2019-2-21

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347805-matlab-pause-does-not-seem-to-work#answer_362109

编辑：TADA 2019-2-21

在 MATLAB Online 中打开

I just encountered the exact same weird issue...

aparently you can switch pause on and off, and i got some piece of code from somewhere which turned it off without noticing. which broke a few unit tests... wasted half a day debugging my timers before realizing pause didn't do anything :\

pause off
pause(10) % pause doesn't do anything
pause on
pause(10) % pauses for 10 sec
p = pause()
p =
    'on'

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 3

Akhilesh Thakur 2017-7-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/347805-matlab-pause-does-not-seem-to-work#answer_275841

The code you wrote is hard to understand. If your file is growing or changing why there is a pause between file1 and file 2. If it says the file is not growing definitely there must be some external thing working on it. Matlab doc says pause temporarily stops MATLAB® execution and waits for the user to press any key. So look for that. Another thing is oldState = pause(state) returns the current pause setting and sets the pause state as indicated by state, you can use this and always do a printf to check whetehr there is a problem in the file.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Dong-Kyeong Lee 2017-7-27

Dear Akhilesh Thakur,

Thank you for your comment.

The reason why I am putting a pause is because if you read the file bytes without pause, it returns the same value. I want to check if it is still recording data by checking the file size difference after a few seconds.

I do not want the pause to wait for a user input, as I want the whole process to be automated and running for an indefinite amount of time.

The current issue right now is not the case of there being a problem in the file. It is the fact that MATLAB decides not to carry out pause or tic/toc and compares the file at the same time, not at a different time. (The biggest issue is that this problem occurs randomly 1~2 times out of 1 week, so it is not predictable)

请先登录，再进行评论。

MATLAB pause does not seem to work

7 个评论
显示 5更早的评论隐藏 5更早的评论

回答（3 个）

5 个评论
显示 3更早的评论隐藏 3更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

MATLAB pause does not seem to work

7 个评论 显示 5更早的评论隐藏 5更早的评论

回答（3 个）

5 个评论 显示 3更早的评论隐藏 3更早的评论

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

另请参阅

类别

标签

Community Treasure Hunt

7 个评论
显示 5更早的评论隐藏 5更早的评论

5 个评论
显示 3更早的评论隐藏 3更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

1 个评论
显示 -1更早的评论隐藏 -1更早的评论