designing feed network of micro strip patch array

2017 7 25
1 个回答
更新时间：2026 8 10
15 次查看（30 天）

1 个投票

hello i have a patch array , is there a way in matlab (rf toolbox or antenna tool box) to get a design of the microstrip feed network for the patch array?
Thanks

请先登录，再回答此问题。

回答（1 个）

Vinod Dwarapudi
Vinod Dwarapudi 2026-8-10
编辑：Vinod Dwarapudi 2026-8-10

0 个投票

Hi fima
Yes. If the patch array is already available, RF PCB Toolbox can be used to design and integrate the microstrip feed network.
A good starting point is the Corporate Feed Divider Network for a Linear Patch Antenna Array example, which demonstrates a corporate-feed network using the powerDividerCorporate element.
Also see: Design, Analyze, and Prototype 2-by-2 Patch Antenna Array - MATLAB & Simulink
For more advanced feed architectures, such as monopulse or beamforming networks, see the S-Band Monopulse Tracking Radar Antenna example, which integrates a patch array with a rat-race coupler feed network.
You can then export the S-parameters of the feed network and use them in RF Blockset for circuit and system-level simulations. In addition, the antenna object or its radiation pattern (embedded element pattern for Array) can be imported into RF Blockset, enabling end-to-end link and beamforming simulations that include both the feed network and antenna characteristics.

类别

在 帮助中心 和 File Exchange 中查找有关 Design, Analysis, Benchmarking, and Verification 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by