Modify an input trajectory in simulink

Question

Windell 2017-8-4

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/351538-modify-an-input-trajectory-in-simulink

回答： Reen 2017-8-22

Hello, I have a staircase trajectory created in matlab and imported into simulink. This trajectory serves as the input into a control system. I would like the output of the control system to periodically modify the staircase trajectory say on a 1 second time basis. Although the controller may update at 1kHz. How would I do this? Is there an example that you might be able to provide?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Reen 2017-8-22

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/351538-modify-an-input-trajectory-in-simulink#answer_278833

I think this may help you. Here's a Simulink model for a custom stair input:

You can easily change the input frequency and amplitude, or even add in some starting value for the input. If you want you can even add some custom logic to the beginning to add a step whenever some event occurs in the system, reset at some time or value, or add logic to change the frequency or amplitude depending on the system state.