phased.SubbandMVDRBeamformer for microphone array
4 次查看(过去 30 天)
显示 更早的评论
I want to implement a MVDRBeamformer for an microphone array. But it is required to set the property 'OperatingFrequency'. In the microphone array case, the signals are not modulated so I do not need to set the operating frequency. How can we solve this problem? Is this not suited for acoustic beamforming?
Thanks. Best Regards, Jiwon
1 个评论
Elisabeth van Pruissen
2018-8-21
Hi Jiwon,
I was wondering if you managed to solve this problem since I want to apply MVDR to acoustic beamforming as well. Maybe you have some tips for me.
Thanks, Elisabeth
回答(2 个)
Honglei Chen
2018-8-21
I would recommend you to look at Frost beamformer which is a time domain implementation. This beamformer works for both narrowband and wideband signals as well as modulated or unmodualted signals. The underneath theory is similar to MVDR.
HTH
0 个评论
Ankit Bhatnagar
2017-8-25
Hi,
There is a default value for the Operating frequency as 300.0e6 Hz, if you don not want to provide one. For more information or similar examples check:
If you are referring to the simulation of the far field for an acoustic signal, At far field, the propagation of sound wave is similar to the propagation of electromagnetic waves. However, the simulation in the toolbox assumes the signal is modulated at a carrier. It cannot simulate the attenuation of an acoustic signal during to propagation based on standard 1/r losses, humidity, and frequency.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Antennas, Microphones, and Sonar Transducers 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!