How to calculate FWHM of beam profile

1 次查看（过去 30 天）

KS 2017-9-18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/357155-how-to-calculate-fwhm-of-beam-profile

评论： Akira Agata 2017-9-20

Hi,

I had acquired an image. After that, I plotted a beam profile from that image (as shown in attached picture below). I need to evaluate the FWHM of that beam profile in order to obtain distance between two point at half of maximum value.

The other problem I had faced is the noisy at pixel number 51 - 52.

My idea is to eliminate the noisy pixels and evaluate the FWHM. But, I dont know how to do it since the beam profile was flipped. Anyone know how to do it?

Thank you.

2 个评论
显示无隐藏无

dpb 2017-9-18

Use negative of signal to turn peak upside down is the classic way...

Akira Agata 2017-9-20

Using median filter medfilt1 will remove this kind of spike noise. Then, use negative of signal. And applying findpeaks to identify the peak position. I believe this would be a straight-forward way to solve this problem.

请先登录，再进行评论。

请先登录，再回答此问题。